Hi Shogoki,
my N54L is waking via WOL with the built-in NIC.
1. Installed the official
FreeNAS-9.2.0-RELEASE-x64 not the patched one from vanni
2. Downloaded the only patched driver
if_bge.zip --- from
http://vannhi.fr/index.php
3. Then follow these steps in a root shell on the server
1.mount -uw /
2.copy if_bge.ko to /boot/kernel
3.Create a new tunable if_bge_load with value YES in the web interface
4.reboot
5.check WOL_MAGIC in ifconfig bge0
Best Regards,
/joe
Pardon my butting in like this... I'm trying to achieve a WOL on my HP Microserver N54L which has the 9.2.1.6 FreeNAS.
I've managed to do the above and WOL_MAGIC in ifconfig bge0 shows
========================================================================================
[root@ASP_HPNAS ~]# ifconfig bge0
bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c2099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWTSO,LINKSTATE>
ether xx:xx:xx:xx:xx:xx
inet 192.xxx.xxx.xxx netmask 0xffffff00 broadcast 192.xxx.xxx.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
========================================================================================
What does the above mean? Is WOL_MAGIC working on the 9.2.1.6 ? Can I start the server using WOL?
Also, how do I do this using my iMac or iPhone?
My apologies once again if I've hijacked this thread... please pardon this noob and kindly be gentle :).