smartct conveyance doesnt run on wd ultrastar?

[phier]

hello
trying to execute smartctl on ultrastar drive

Model Family: Western Digital Ultrastar DC HC550
Device Model: WDC WUH721818ALE6L4

i am getting following error
root@truenas[~]# smartctl -t conveyance /dev/ada0
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RC6 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Conveyance Self-test functions not supported

Sending command: "Execute SMART Conveyance self-test routine immediately in off-line mode".
Command "Execute SMART Conveyance self-test routine immediately in off-line mode" failed: Input/output error

any idea why?

 

[elvisimprsntr]

hello
trying to execute smartctl on ultrastar drive

Model Family: Western Digital Ultrastar DC HC550
Device Model: WDC WUH721818ALE6L4

i am getting following error
root@truenas[~]# smartctl -t conveyance /dev/ada0
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RC6 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Conveyance Self-test functions not supported

Sending command: "Execute SMART Conveyance self-test routine immediately in off-line mode".
Command "Execute SMART Conveyance self-test routine immediately in off-line mode" failed: Input/output error

any idea why?

You will need to reach out to WD. Self tests are embedded in the drives.

 

[Redcoat]

"any idea why?

Yes: Not all drives support Conveyance tests. Search here for previous posts on this issue.

 

[phier]

thanks