Hazimil
Contributor
- Joined
- May 26, 2014
- Messages
- 172
Hi,
I'm currently testing my new build and have successful run (with no errors) the following tests on all drives (ada0 to ada8)
However, I can only run the following test on my Micro SSD boot drive (ada8), and not the WD Reds:
If I try to run it on the WD reds I get the following error:
Am I doing something wrong, or is there a problem with the WD reds, or is it they just don't support that test (which is what I'm thinking)?
Any guidance, would be welcomed.
Yours
Jonathan
I'm currently testing my new build and have successful run (with no errors) the following tests on all drives (ada0 to ada8)
Code:
smartctl -t short /dev/ada0 smartctl -t long /dev/ada0
However, I can only run the following test on my Micro SSD boot drive (ada8), and not the WD Reds:
Code:
smartstl -t conveyance /dev/ada8
If I try to run it on the WD reds I get the following error:
Code:
smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.0-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Conveyance Self-test functions not supported Sending command: "Execute SMART Conveyance self-test routine immediately in off-line mode". Command "Execute SMART Conveyance self-test routine immediately in off-line mode" failed: Input/output error
Am I doing something wrong, or is there a problem with the WD reds, or is it they just don't support that test (which is what I'm thinking)?
Any guidance, would be welcomed.
Yours
Jonathan