Having problems with my new mobo to get network card working. I just switched the mobo and everything else is the same old (old config still on the usb installation which is also the same)
I get this on freenas and64 8.3.0:
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x2000-0x201f mem 0xd1300000-0xd131ffff,0xd1200000-0xd12ffffff,0xd1320000-0xd1323fff irq 16 at device 0.0 on pci1
em0: Using an MSI interrupt
em0: The EEPROM Checksum Is Not Valid
device_attach: em0 attach returned 5
i found this guy on freebsd with the exactly the same problem but i tried flashing my card and int went OK but in freenas the issue persists.
http://forum.pfsense.org/index.php?topic=51404.0
i tried:
bootutil -nic=1 -up=PXE -FE -WOLE
and it booted and flashed the card
I have also flashed newest intel bios before that but nothing changes. (i also have PXE enabled in bios)
Atleast now in bootutil it says that flash firmware is PXE version 1.5.01 (intel(R) Boot Agent GE?)
Does anybody know if the drivers are still to old in freenas for my built in intel atom nic (d2700mud)?
If so, does the ones (intel site link below) in freebsd 9 work in the older freenas? Any help appreciated i dont want to screw things up more than i have to...
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=17509
I get this on freenas and64 8.3.0:
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x2000-0x201f mem 0xd1300000-0xd131ffff,0xd1200000-0xd12ffffff,0xd1320000-0xd1323fff irq 16 at device 0.0 on pci1
em0: Using an MSI interrupt
em0: The EEPROM Checksum Is Not Valid
device_attach: em0 attach returned 5
i found this guy on freebsd with the exactly the same problem but i tried flashing my card and int went OK but in freenas the issue persists.
http://forum.pfsense.org/index.php?topic=51404.0
i tried:
bootutil -nic=1 -up=PXE -FE -WOLE
and it booted and flashed the card
I have also flashed newest intel bios before that but nothing changes. (i also have PXE enabled in bios)
Atleast now in bootutil it says that flash firmware is PXE version 1.5.01 (intel(R) Boot Agent GE?)
Does anybody know if the drivers are still to old in freenas for my built in intel atom nic (d2700mud)?
If so, does the ones (intel site link below) in freebsd 9 work in the older freenas? Any help appreciated i dont want to screw things up more than i have to...
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=17509