FN11.3 iocage jails - Plex, Tautulli, Sonarr, Radarr, Lidarr, Jackett, Transmission, Organizr

[Amsoil_Jim]

sickrage just broke on me, So I have decided to try Sonarr and Jackett. The issue I am having is that Sonarr has downloaded something but now can not move it. Any suggestions on fixing this issue?

Code:

18-10-20 10:38:08.2|Error|DownloadedEpisodesImportService|Import failed, path does not exist or is not accessible by Sonarr: /media/downloads/hawaii.five-0.2010.s09e04.1080p.web.x264-tbs.mkv

Never mind. the "path" did not exist... I didn't mount the download directory in the Sonarr jail. After mounting it it works fine.

 

[rio236]

Does anyone have installations instructions for Syncthing and Unifi similar to Pentaflake's format?
Please share if you do.
I've installed Plex and Tautulli and both installed and works great! Thanks Pentaflake.

 

[Amsoil_Jim]

has anyone got ombi to work yet?

 

[MoonPie]

I created a Ubuntu VM and installed Ombi. Advantage- I can use current version unlike FreeBSD jail.

 

[Amsoil_Jim]

I created a Ubuntu VM and installed Ombi. Advantage- I can use current version unlike FreeBSD jail.

Ok, sweet, I have done this. I have never used Ombi before. Can you point me in the right direction for allowing remote users to access it securely , since that’s kind of this point?
Thanks

 

[MoonPie]

I just simple setup a forward rule on router using ddns address.

 

[peter_cd.cn]

I followed the setup until Ombi, which is where it stopped working. Ombi Jail appears to be running and service is running. but visiting Ombi IP/port says "site can't be reached"

Code:

root@freenas:~ # iocage exec ombi service ombi stop
ombi not running?
root@freenas:~ # iocage exec ombi service ombi start
Starting ombi.
root@freenas:~ #

One bigger questions is, with all the Plugins I installed, why can't I see them under Freenas Web UI?
I am running FreeNas 11.2 release version
Under Plugins --> Installed, it says "No data to display"

Is it because I didn't install plugins via the web gui? This should not affect my regular use of the plugins, correct? What if I want to change some plugin settings? For example, for Plex I need to disable security for initial access, I used to to this by click on the installed plex plugin, and click the check mark. If they are not showing in web GUI?, do I have to relay on command to change this?

 

[danb35]

with all the Plugins I installed, why can't I see them under Freenas Web UI?

Because these aren't plugins.

 

[peter_cd.cn]

Because these aren't plugins.

Are they Linux version of applications running on individual vm(Jail)?

So they are not freenas plugins but just Linux applications...


Sent from my iPhone using Tapatalk

 

[danb35]

Are they Linux version of applications running on individual vm(Jail)?

No, they have nothing to do with Linux nor with a VM. They're (FreeBSD) applications running inside a jail. They aren't plugins.

 

[nasmart]

Is the guide ready for 11.2 (in and outside the jail)?

 

[peter_cd.cn]

No, they have nothing to do with Linux nor with a VM. They're (FreeBSD) applications running inside a jail. They aren't plugins.

Got it. I read the Jail section and Plugins section of the manual. Plugins VS. applications running inside a jail are two different ways of installing additional service in a FreeNas.

 

[danb35]

Plugins VS. applications running inside a jail are two different ways of installing additional service in a FreeNas.

Correct. And plugins are simply preconfigured jails.

 

[peter_cd.cn]

Correct. And plugins are simply preconfigured jails.

If I choose to create-config jails and install applications manually as this thread. I will not be able to have them show up in "installed plugins"? In the future, any updates or changes has to relay on command line? I am fine doing that just want to know the different options here.

 

[danb35]

If I choose to create-config jails and install applications manually as this thread. I will not be able to have them show up in "installed plugins"?

Correct. Only plugins will show up in "installed plugins". What you do should show up on the Jails screens, though.

 

[peter_cd.cn]

If I choose to create-config jails and install applications manually as this thread. I will not be able to have them show up in "installed plugins"? In the future, any updates or changes has to relay on command line? I am fine doing that just want to know the different options here.

I guess each application have their web UI to do a lot the configuration. Such as update application itself.
Only things I need command line maybe managing Jails...

 

[Vaikis_]

who can help with plex, do according example, create user and group but networking part doesnt work..
my 11.2-RC1 FreeNAS netwo
rking:

root@freenas[~]# ifconfig -a
vmx0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=200099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,RXCSUM_IPV6>
ether 00:0c:29:9e:1d:d0
hwaddr 00:0c:29:9e:1d:d0
inet 192.168.8.155 netmask 0xffffff00 broadcast 192.168.8.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:81:30:a3:61:00
nd6 options=1<PERFORMNUD>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: vnet0:2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 4 priority 128 path cost 2000
member: vmx0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 2000
vnet0:2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: associated with jail: plex
options=8<VLAN_MTU>
ether 02:ff:60:14:fa:09
hwaddr 02:3c:d0:00:04:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair
root@freenas[~]#


Jail network:

root@freenas[~]# iocage get all plex
CONFIG_VERSION:14
allow_chflags:0
allow_mlock:0
allow_mount:0
allow_mount_devfs:0
allow_mount_nullfs:0
allow_mount_procfs:0
allow_mount_tmpfs:0
allow_mount_zfs:0
allow_quotas:0
allow_raw_sockets:1
allow_set_hostname:1
allow_socket_af:0
allow_sysvipc:0
allow_tun:0
available:readonly
basejail:no
boot:on
bpf:no
children_max:0
cloned_release:11.2-RELEASE
comment:none
compression:lz4
compressratio:readonly
coredumpsize:off
count:1
cpuset:off
cputime:off
datasize:off
dedup:off
defaultrouter:192.168.8.1
defaultrouter6:none
depends:none
devfs_ruleset:4
dhcp:off
enforce_statfs:2
exec_clean:1
exec_fib:0
exec_jail_user:root
exec_poststart:/usr/bin/true
exec_poststop:/usr/bin/true
exec_prestart:/usr/bin/true
exec_prestop:/usr/bin/true
exec_start:/bin/sh /etc/rc
exec_stop:/bin/sh /etc/rc.shutdown
exec_system_jail_user:0
exec_system_user:root
exec_timeout:60
host_domainname:none
host_hostname:plex
host_hostuuid:plex
host_time:yes
hostid:b1f41c83-e04f-11e8-8e42-000c299e1dd0
hostid_strict_check:off
interfaces:vnet0:bridge0
ip4:new
ip4_addr:vnet0|192.168.8.156/24
ip4_saddrsel:1
ip6:new
ip6_addr:none
ip6_saddrsel:1
jail_zfs:off
jail_zfs_dataset:iocage/jails/plex/data
jail_zfs_mountpoint:none
last_started:2018-11-08 21:51:59
login_flags:-f root
mac_prefix:02ff60
maxproc:off
memorylocked:off
memoryuse:off
mount_devfs:1
mount_fdescfs:1
mount_linprocfs:0
mount_procfs:0
mountpoint:readonly
msgqqueued:off
msgqsize:off
nmsgq:off
notes:none
nsemop:off
nshm:off
nthr:off
openfiles:off
origin:readonly
owner:root
pcpu:off
priority:99
pseudoterminals:off
quota:none
release:11.2-RELEASE-p4
reservation:none
resolver:/etc/resolv.conf
rlimits:off
securelevel:2
shmsize:off
stacksize:off
state:up
stop_timeout:30
swapuse:off
sync_state:none
sync_target:none
sync_tgt_zpool:none
sysvmsg:new
sysvsem:new
sysvshm:new
template:no
type:jail
used:readonly
vmemoryuse:off
vnet:on
vnet0_mac:02ff6014fa09 02ff6014fa0a
vnet1_mac:none
vnet2_mac:none
vnet3_mac:none
vnet_default_interface:none
vnet_interfaces:none
wallclock:off

 

[SavageAUS]

Code tags are your friend.


Sent from my iPhone using Tapatalk

 

[Pentaflake]

Is the guide ready for 11.2 (in and outside the jail)?

The only required change should be the addition of allow_tun=1 to transmission during new setup. I will be testing everything once its officially out.

 

[denist]

Hi Guys,

I have completed my iocage setup and everything is working. I have zip up my guide and uploaded to dropbox. Take a look, it might help out someone.

Thanks to everyone who has contributed with guides and tips. I take no credit for this.

https://www.dropbox.com/s/tajpmrczzygas78/Iocage_setup_tutorial.7z?dl=0