Hello all. First of all a big thank you to all of you for the tremendous effort that goes in to helping absolute amateurs such as my self in achieving so much from FreeNAS.
I have been using FreeNAS for almost two years. It is currently on 9.10 STABLE. I have been meaning to upgrade it to 11 for sometime. I went about doing a bit of research on how to update and I was initally receving a message of 'no update available' despite switching trains. After a few reboots the files were found and downloading via the GUI. However, I now get an error saying:
I have checked df -h which shows:
This seems awfully high. The only option within System > Boot is 9.10.2-U6. The boot drive is a 16GB USB. I would ideally not have to do a fresh install if I can avoid it. I have saved my config file just in case. All of the above research is what I have managed to do by researching and browsing this forums but I am a complete novice
Any ideas?
I have been using FreeNAS for almost two years. It is currently on 9.10 STABLE. I have been meaning to upgrade it to 11 for sometime. I went about doing a bit of research on how to update and I was initally receving a message of 'no update available' despite switching trains. After a few reboots the files were found and downloading via the GUI. However, I now get an error saying:
Code:
error: 'insufficient space to install update' freenas
I have checked df -h which shows:
Code:
Filesystem Size Used Avail Capacity Mounted on freenas-boot/ROOT/9.10.2-U6 14G 13G 599M 96%
This seems awfully high. The only option within System > Boot is 9.10.2-U6. The boot drive is a 16GB USB. I would ideally not have to do a fresh install if I can avoid it. I have saved my config file just in case. All of the above research is what I have managed to do by researching and browsing this forums but I am a complete novice
Any ideas?