Installed the two new CPUs, and the disks still arent showing up. However, the numbering is all off now. And come to think of it, how could it have been a cpu issue? all the disks showed up fine during install and in the LSI configurator. Its only once installed that they are missing.
Code:
Last login: Fri Jan 13 17:35:03 on pts/0
FreeBSD 13.1-RELEASE-p2 n245412-484f039b1d0 TRUENAS
TrueNAS (c) 2009-2022, iXsystems, Inc.
All rights reserved.
TrueNAS code is released under the modified BSD license with some
files copyrighted by (c) iXsystems, Inc.
For more information, documentation, help or support, go here:
http://truenas.com
Welcome to TrueNAS
Warning: the supported mechanisms for making configuration changes
are the TrueNAS WebUI and API exclusively. ALL OTHERS ARE
NOT SUPPORTED AND WILL RESULT IN UNDEFINED BEHAVIOR AND MAY
RESULT IN SYSTEM FAILURE.
root@truenas[~]# dmesg
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p2 n245412-484f039b1d0 TRUENAS amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): text 80x25
CPU: Intel(R) Xeon(R) CPU X5687 @ 3.60GHz (3599.06-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 94489280512 (90112 MB)
avail memory = 91937742848 (87678 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20201113/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20201113/tbfadt-850)
ioapic1 <Version 2.0> irqs 24-47
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 3 2 5 6 4 14 13 8 9 10 7 11 15 12
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
padlock0: No ACE support.
acpi0: <HP ProLiant>
acpi0: Power Button (fixed)
acpi0: _OSC failed: AE_BUFFER_OVERFLOW
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
mps0: <Avago Technologies (LSI) SAS2008> port 0x6000-0x60ff mem 0xfbff0000-0xfbff3fff,0xfbf80000-0xfbfbffff irq 26 at device 0.0 on pci5
mps0: Firmware: 13.00.57.00, Driver: 21.02.00.00-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib7
mps1: <Avago Technologies (LSI) SAS2008> port 0x5000-0x50ff mem 0xfbef0000-0xfbefffff,0xfbe80000-0xfbebffff irq 30 at device 0.0 on pci7
mps1: Firmware: 07.15.08.00, Driver: 21.02.00.00-fbsd
mps1: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
pcib8: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci8: <ACPI PCI bus> on pcib8
ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x4000-0x401f mem 0xfbd80000-0xfbdfffff,0xfbd70000-0xfbd73fff irq 31 at device 0.0 on pci8
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 8 RX queues 8 TX queues
ix0: Using MSI-X interrupts with 9 vectors
ix0: allocated for 8 queues
ix0: allocated for 8 rx queues
ix0: Ethernet address: 90:e2:ba:30:6c:78
ix0: PCI Express Bus: Speed 5.0GT/s Width x4
ix0: eTrack 0x0001546c PHY FW V65535
ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x4020-0x403f mem 0xfbc80000-0xfbcfffff,0xfbc70000-0xfbc73fff irq 39 at device 0.1 on pci8
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 8 RX queues 8 TX queues
ix1: Using MSI-X interrupts with 9 vectors
ix1: allocated for 8 queues
ix1: allocated for 8 rx queues
ix1: Ethernet address: 90:e2:ba:30:6c:79
ix1: PCI Express Bus: Speed 5.0GT/s Width x4
ix1: eTrack 0x0001546c PHY FW V65535
pcib9: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib11
bce0: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci11
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: 80:c1:6e:23:a2:46
bce0: ASIC (0x57092003); Rev (C0);
bce0: link state changed to DOWN
Bus (PCIe x2, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf2000000-0xf3ffffff irq 17 at device 0.1 on pci11
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Using defaults for TSO: 65518/35/2048
bce1: Ethernet address: 80:c1:6e:23:a2:48
bce1: ASIC (0x57092003);
bce1: link state changed to DOWN
Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib12: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci12: <ACPI PCI bus> on pcib12
bce2: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci12
miibus2: <MII bus> on bce2
brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce2: Using defaults for TSO: 65518/35/2048
bce2: Ethernet address: 80:c1:6e:23:a2:4a
bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce3: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf6000000-0xf7ffffff irq 19 at device 0.1 on pci12
miibus3: <MII bus> on bce3
brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce3: Using defaults for TSO: 65518/35/2048
bce3: Ethernet address: 80:c1:6e:23:a2:4c
bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib13: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib13
uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 17 at device 0.4 on pci13
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1000-0x101f irq 20 at device 29.0 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1020-0x103f irq 23 at device 29.1 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1040-0x105f irq 22 at device 29.2 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1060-0x107f irq 23 at device 29.3 on pci0
usbus4 on uhci4
usbus4: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf1bf0000-0xf1bf03ff irq 20 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: 480Mbps High Speed USB v2.0
pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci14: <ACPI PCI bus> on pcib14
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xe8000000-0xefffffff,0xf1cf0000-0xf1cfffff irq 23 at device 3.0 on pci14
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_tz0: <Thermal Zone> on acpi0
ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0.
psm0: model IntelliMouse Explorer, device ID 4
acpi_syscontainer0: <System Container> port 0x2e-0x2f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x31f on acpi0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags0x10 on acpi0
ichwd0: <Intel ICH10 watchdog timer> on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
ichwd0: <Intel ICH10 watchdog timer> at port 0x930-0x937,0x960-0x97f on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1c
device_attach: est15 attach returned 6
Timecounter "TSC-low" frequency 1799488487 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen5.1: <Intel EHCI root HUB> at usbus5
ugen0.1: <HP UHCI root HUB> at usbus0
uhub0 on usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1 on usbus3
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub2 on usbus4
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub3 on usbus5
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub4 on usbus2
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub5 on usbus0
uhub5: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ipmi0: IPMI device rev. 1, firmware rev. 1.89, version 2.0, device support mask0x8f
ipmi0: Number of channels 1
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
Trying to mount root from zfs:boot-pool/ROOT/default []...
uhub0: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
ugen0.2: <HP Virtual Keyboard> at usbus0
ukbd0 on uhub5
ukbd0: <Virtual Keyboard > on usbus0
kbd2 at ukbd0
ums0 on uhub5
ums0: <Virtual Mouse> on usbus0
Root mount waiting for: CAM usbus5
Root mount waiting for: CAM usbus5
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
da0 at mps0 bus 0 scbus0 target 8 lun 0
da0: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number YVJSDU3D
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 2861588MB (5860533168 512 byte sectors)
da2 at mps0 bus 0 scbus0 target 10 lun 0
da2: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number YVKP6T9K
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 2861588MB (5860533168 512 byte sectors)
da3 at mps0 bus 0 scbus0 target 11 lun 0
da3: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number YVKUA2WK
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 2861588MB (5860533168 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 9 lun 0
da1: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number YVKMX11K
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 2861588MB (5860533168 512 byte sectors)
da11 at mps0 bus 0 scbus0 target 19 lun 0
da11: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da11: Serial Number YVKP5EAK
da11: 600.000MB/s transfers
da11: Command Queueing enabled
da11: 2861588MB (5860533168 512 byte sectors)
da4 at mps0 bus 0 scbus0 target 12 lun 0
da4: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da4: Serial Number YVKNEURK
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 2861588MB (5860533168 512 byte sectors)
da9 at mps0 bus 0 scbus0 target 17 lun 0
da9: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da9: Serial Number YVJT1HBK
da9: 600.000MB/s transfers
da9: Command Queueing enabled
da9: 2861588MB (5860533168 512 byte sectors)
da5 at mps0 bus 0 scbus0 target 13 lun 0
da5: <HGST HUS724030ALS640 A124> Fixed Direct Access SPC-4 SCSI device
da5: Serial Number P9G7PRRW
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 2861588MB (5860533168 512 byte sectors)
da14 at mps0 bus 0 scbus0 target 22 lun 0
da14: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da14: Serial Number YVKP6UGK
da14: 600.000MB/s transfers
da14: Command Queueing enabled
da14: 2861588MB (5860533168 512 byte sectors)
da15 at mps0 bus 0 scbus0 target 23 lun 0
da15: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da15: Serial Number YVKTY7GK
da15: 600.000MB/s transfers
da15: Command Queueing enabled
da15: 2861588MB (5860533168 512 byte sectors)
da8 at mps0 bus 0 scbus0 target 16 lun 0
da8: <HGST HUS724030ALS640 A124> Fixed Direct Access SPC-4 SCSI device
da8: Serial Number P9J262LW
da8: 600.000MB/s transfers
da8: Command Queueing enabled
da8: 2861588MB (5860533168 512 byte sectors)
da6 at mps0 bus 0 scbus0 target 14 lun 0
da6: <HGST HUS724030ALS640 A124> Fixed Direct Access SPC-4 SCSI device
da6: Serial Number P9HN7B4W
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 2861588MB (5860533168 512 byte sectors)
da13 at mps0 bus 0 scbus0 target 21 lun 0
da13: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da13: Serial Number YVJJ3LMD
da13: 600.000MB/s transfers
da13: Command Queueing enabled
da13: 2861588MB (5860533168 512 byte sectors)
da17 at mps0 bus 0 scbus0 target 46 lun 0
da17: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da17: Serial Number YVKMX11K
da17: 600.000MB/s transfers
da17: Command Queueing enabled
da17: 2861588MB (5860533168 512 byte sectors)
da18 at mps0 bus 0 scbus0 target 47 lun 0
da18: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da18: Serial Number YVKP6T9K
da18: 600.000MB/s transfers
da18: Command Queueing enabled
da18: 2861588MB (5860533168 512 byte sectors)
da20 at mps0 bus 0 scbus0 target 49 lun 0
da20: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da20: Serial Number YVKNEURK
da20: 600.000MB/s transfers
da20: Command Queueing enabled
da20: 2861588MB (5860533168 512 byte sectors)
da23 at mps0 bus 0 scbus0 target 52 lun 0
da23: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da23: Serial Number YVKTYMZK
da23: 600.000MB/s transfers
da23: Command Queueing enabled
da23: 2861588MB (5860533168 512 byte sectors)
da27 at mps0 bus 0 scbus0 target 56 lun 0
da27: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da27: Serial Number YVKP5EAK
da27: 600.000MB/s transfers
da27: Command Queueing enabled
da27: 2861588MB (5860533168 512 byte sectors)
da7 at mps0 bus 0 scbus0 target 15 lun 0
da7: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da7: Serial Number YVKTYMZK
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 2861588MB (5860533168 512 byte sectors)
da26 at mps0 bus 0 scbus0 target 55 lun 0
da26: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da26: Serial Number YVKVU0KK
da26: 600.000MB/s transfers
da26: Command Queueing enabled
da26: 2861588MB (5860533168 512 byte sectors)
da30 at mps0 bus 0 scbus0 target 59 lun 0
da30: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da30: Serial Number YVKP6UGK
da30: 600.000MB/s transfers
da30: Command Queueing enabled
da30: 2861588MB (5860533168 512 byte sectors)
da29 at mps0 bus 0 scbus0 target 58 lun 0
da29: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da29: Serial Number YVJJ3LMD
da29: 600.000MB/s transfers
da29: Command Queueing enabled
da29: 2861588MB (5860533168 512 byte sectors)
da12 at mps0 bus 0 scbus0 target 20 lun 0
da12: <HGST HUS724030ALS640 A124> Fixed Direct Access SPC-4 SCSI device
da12: Serial Number P9HMRN0W
da12: 600.000MB/s transfers
da12: Command Queueing enabled
da12: 2861588MB (5860533168 512 byte sectors)
da19 at mps0 bus 0 scbus0 target 48 lun 0
da19: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da19: Serial Number YVKUA2WK
da19: 600.000MB/s transfers
da19: Command Queueing enabled
da19: 2861588MB (5860533168 512 byte sectors)
da24 at mps0 bus 0 scbus0 target 53 lun 0
da24: <HGST HUS724030ALS640 A124> Fixed Direct Access SPC-4 SCSI device
da24: Serial Number P9J262LW
da24: 600.000MB/s transfers
da24: Command Queueing enabled
da24: 2861588MB (5860533168 512 byte sectors)
da16 at mps0 bus 0 scbus0 target 45 lun 0
da16: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da16: Serial Number YVJSDU3D
da16: 600.000MB/s transfers
da16: Command Queueing enabled
da16: 2861588MB (5860533168 512 byte sectors)
da21 at mps0 bus 0 scbus0 target 50 lun 0
da21: <HGST HUS724030ALS640 A124> Fixed Direct Access SPC-4 SCSI device
da21: Serial Number P9G7PRRW
da21: 600.000MB/s transfers
da21: Command Queueing enabled
da21: 2861588MB (5860533168 512 byte sectors)
da34 at mps1 bus 0 scbus1 target 9 lun 0
da34: <HP DG0146FAMWL HPDC> Fixed Direct Access SPC-3 SCSI device
da34: Serial Number 3SD13EP400009005J5LK
da34: 600.000MB/s transfers
da34: Command Queueing enabled
da34: 140014MB (286749488 512 byte sectors)
da10 at mps0 bus 0 scbus0 target 18 lun 0
da10: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da10: Serial Number YVKVU0KK
da10: 600.000MB/s transfers
da10: Command Queueing enabled
da10: 2861588MB (5860533168 512 byte sectors)
da25 at mps0 bus 0 scbus0 target 54 lun 0
da25: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da25: Serial Number YVJT1HBK
da25: 600.000MB/s transfers
da25: Command Queueing enabled
da25: 2861588MB (5860533168 512 byte sectors)
ses0 at mps0 bus 0 scbus0 target 44 lun 0
ses0: <Promise J630s 060=> Fixed Enclosure Services SPC-4 SCSI device
ses0: Serial Number TB0038052886
ses0: 600.000MB/s transfers
ses0: Command Queueing enabled
ses0: SES Device
da35 at mps1 bus 0 scbus1 target 10 lun 0
da35: <HP DG0146FAMWL HPDB> Fixed Direct Access SPC-3 SCSI device
da35: Serial Number 3SD0QESR00009953RW2U
da35: 600.000MB/s transfers
da35: Command Queueing enabled
da35: 140014MB (286749488 512 byte sectors)
da31 at mps0 bus 0 scbus0 target 60 lun 0
da31: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device
da31: Serial Number YVKTY7GK
da31: 600.000MB/s transfers
da31: Command Queueing enabled
da31: 2861588MB (5860533168 512 byte sectors)
da22 at mps0 bus 0 scbus0 target 51 lun 0
da22: <HGST HUS724030ALS640 A124> Fixed Direct Access SPC-4 SCSI device
da22: Serial Number P9HN7B4W
da22: 600.000MB/s transfers
da22: Command Queueing enabled
da22: 2861588MB (5860533168 512 byte sectors)
da28 at mps0 bus 0 scbus0 target 57 lun 0
da28: <HGST HUS724030ALS640 A124> Fixed Direct Access SPC-4 SCSI device
da28: Serial Number P9HMRN0W
da28: 600.000MB/s transfers
da28: Command Queueing enabled
da28: 2861588MB (5860533168 512 byte sectors)
ses1 at mps0 bus 0 scbus0 target 81 lun 0
ses1: <Promise J630s 060=> Fixed Enclosure Services SPC-4 SCSI device
ses1: Serial Number TB0038052886
ses1: 600.000MB/s transfers
ses1: Command Queueing enabled
ses1: SES Device
da32 at mps1 bus 0 scbus1 target 7 lun 0
da32: <HP DG146ABAB4 HPDC> Fixed Direct Access SPC-3 SCSI device
da32: Serial Number 3NM4BY200000982745Y8
da32: 300.000MB/s transfers
da32: Command Queueing enabled
da32: 140014MB (286749488 512 byte sectors)
da33 at mps1 bus 0 scbus1 target 8 lun 0
da33: <HP DG146BB976 HPDC> Fixed Direct Access SPC-3 SCSI device
da33: Serial Number 3NM5606F000098388V18
da33: 300.000MB/s transfers
da33: Command Queueing enabled
da33: 140014MB (286749488 512 byte sectors)
ses0: da0,pass0 in Array Device Slot 1, SAS Slot: 1+ phys at slot 1
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03e9b4e86
ses0: da1,pass1 in Array Device Slot 2, SAS Slot: 1+ phys at slot 2
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03ecd4b32
ses0: da2,pass2 in Array Device Slot 3, SAS Slot: 1+ phys at slot 3
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03ecfaf16
ses0: da3,pass3 in Array Device Slot 4, SAS Slot: 1+ phys at slot 4
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03ed726b6
ses0: da4,pass4 in Array Device Slot 5, SAS Slot: 1+ phys at slot 5
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03ece4766
ses0: da5,pass5 in Array Device Slot 6, SAS Slot: 1+ phys at slot 6
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca0580e00ba
ses1: da16,pass17 in Array Device Slot 1, SAS Slot: 1+ phys at slot 1
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03e9b4e85
ses0: da6,pass6 in Array Device Slot 7, SAS Slot: 1+ phys at slot 7
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca0585d2a36
ses1: da17,pass18 in Array Device Slot 2, SAS Slot: 1+ phys at slot 2
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03ecd4b31
ses0: da7,pass7 in Array Device Slot 8, SAS Slot: 1+ phys at slot 8
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03ed67ace
ses1: da18,pass19 in Array Device Slot 3, SAS Slot: 1+ phys at slot 3
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03ecfaf15
ses0: da8,pass8 in Array Device Slot 9, SAS Slot: 1+ phys at slot 9
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca05874ba5a
ses1: da19,pass20 in Array Device Slot 4, SAS Slot: 1+ phys at slot 4
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03ed726b5
ses0: da9,pass9 in Array Device Slot 10, SAS Slot: 1+ phys at slot 10
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03e9c761e
ses1: da20,pass21 in Array Device Slot 5, SAS Slot: 1+ phys at slot 5
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03ece4765
ses0: da10,pass10 in Array Device Slot 11, SAS Slot: 1+ phys at slot 11
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03ed9d84e
ses1: da21,pass22 in Array Device Slot 6, SAS Slot: 1+ phys at slot 6
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca0580e00b9
ses0: da11,pass11 in Array Device Slot 12, SAS Slot: 1+ phys at slot 12
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03ecf9ac2
ses1: da22,pass23 in Array Device Slot 7, SAS Slot: 1+ phys at slot 7
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca0585d2a35
ses0: da12,pass12 in Array Device Slot 13, SAS Slot: 1+ phys at slot 13
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca0585c3e42
ses1: da23,pass24 in Array Device Slot 8, SAS Slot: 1+ phys at slot 8
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03ed67acd
ses0: da13,pass13 in Array Device Slot 14, SAS Slot: 1+ phys at slot 14
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03e8e09da
ses1: da24,pass25 in Array Device Slot 9, SAS Slot: 1+ phys at slot 9
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca05874ba59
ses0: da14,pass14 in Array Device Slot 15, SAS Slot: 1+ phys at slot 15
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03ecfafa6
ses1: da25,pass26 in Array Device Slot 10, SAS Slot: 1+ phys at slot 10
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03e9c761d
ses0: da15,pass15 in Array Device Slot 16, SAS Slot: 1+ phys at slot 16
ses0: phy 0: SAS device type 1 phy 1 Target ( SSP )
ses0: phy 0: parent 500015556694d33f addr 5000cca03ed674be
ses1: da26,pass27 in Array Device Slot 11, SAS Slot: 1+ phys at slot 11
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03ed9d84d
ses1: da27,pass28 in Array Device Slot 12, SAS Slot: 1+ phys at slot 12
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03ecf9ac1
ses1: da28,pass29 in Array Device Slot 13, SAS Slot: 1+ phys at slot 13
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca0585c3e41
ses1: da29,pass30 in Array Device Slot 14, SAS Slot: 1+ phys at slot 14
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03e8e09d9
ses1: da30,pass31 in Array Device Slot 15, SAS Slot: 1+ phys at slot 15
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03ecfafa5
ses1: da31,pass32 in Array Device Slot 16, SAS Slot: 1+ phys at slot 16
ses1: phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1: phy 0: parent 500015556694d23f addr 5000cca03ed674bd
lo0: link state changed to UP
GEOM_MULTIPATH: disk7 created
GEOM_MULTIPATH: da22 added to disk7
GEOM_MULTIPATH: da22 is now active path in disk7
GEOM_MULTIPATH: disk13 created
GEOM_MULTIPATH: da28 added to disk13
GEOM_MULTIPATH: da28 is now active path in disk13
GEOM_MULTIPATH: disk16 created
GEOM_MULTIPATH: da31 added to disk16
GEOM_MULTIPATH: da31 is now active path in disk16
GEOM_MULTIPATH: disk1 created
GEOM_MULTIPATH: da16 added to disk1
GEOM_MULTIPATH: da16 is now active path in disk1
GEOM_MULTIPATH: disk10 created
GEOM_MULTIPATH: da25 added to disk10
GEOM_MULTIPATH: da25 is now active path in disk10
GEOM_MULTIPATH: disk11 created
GEOM_MULTIPATH: da10 added to disk11
GEOM_MULTIPATH: da10 is now active path in disk11
GEOM_MULTIPATH: disk4 created
GEOM_MULTIPATH: da19 added to disk4
GEOM_MULTIPATH: da19 is now active path in disk4
GEOM_MULTIPATH: disk8 created
GEOM_MULTIPATH: da7 added to disk8
GEOM_MULTIPATH: da7 is now active path in disk8
GEOM_MULTIPATH: da12 added to disk13
GEOM_MULTIPATH: disk6 created
GEOM_MULTIPATH: da21 added to disk6
GEOM_MULTIPATH: da21 is now active path in disk6
GEOM_MULTIPATH: disk9 created
GEOM_MULTIPATH: da24 added to disk9
GEOM_MULTIPATH: da24 is now active path in disk9
GEOM_MULTIPATH: disk14 created
GEOM_MULTIPATH: da29 added to disk14
GEOM_MULTIPATH: da29 is now active path in disk14
GEOM_MULTIPATH: da13 added to disk14
GEOM_MULTIPATH: disk15 created
GEOM_MULTIPATH: da30 added to disk15
GEOM_MULTIPATH: da30 is now active path in disk15
GEOM_MULTIPATH: da23 added to disk8
GEOM_MULTIPATH: da26 added to disk11
GEOM_MULTIPATH: disk12 created
GEOM_MULTIPATH: da27 added to disk12
GEOM_MULTIPATH: da27 is now active path in disk12
GEOM_MULTIPATH: disk5 created
GEOM_MULTIPATH: da20 added to disk5
GEOM_MULTIPATH: da20 is now active path in disk5
GEOM_MULTIPATH: disk3 created
GEOM_MULTIPATH: da18 added to disk3
GEOM_MULTIPATH: da18 is now active path in disk3
GEOM_MULTIPATH: da6 added to disk7
GEOM_MULTIPATH: disk2 created
GEOM_MULTIPATH: da17 added to disk2
GEOM_MULTIPATH: da17 is now active path in disk2
GEOM_MULTIPATH: da8 added to disk9
GEOM_MULTIPATH: da5 added to disk6
GEOM_MULTIPATH: da14 added to disk15
GEOM_MULTIPATH: da15 added to disk16
GEOM_MULTIPATH: da9 added to disk10
GEOM_MULTIPATH: da11 added to disk12
GEOM_MULTIPATH: da3 added to disk4
GEOM_MULTIPATH: da1 added to disk2
GEOM_MULTIPATH: da4 added to disk5
GEOM_MULTIPATH: da2 added to disk3
GEOM_MULTIPATH: da0 added to disk1
CPU: Intel(R) Xeon(R) CPU X5687 @ 3.60GHz (3598.98-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
bce2: link state chan
I will look into weather or not those cards are counterfeit next. Any help is appreciated. Thanks.