I've had TrueNAS Core machine running for many years now. I've upgraded it to the current version. I've been having some data issues whenever the pool is under heavy load but it's been localized to the LSI HBA drives so I think my 2008 is starting to go south.
I picked up a 2308 and flashed it to the latest IT firmware (20.00.07.00-IT) on a different machine. Then I swapped out the 2008 for the 2308.
When log into TrueNAS Core, my pool doesn't show up and looking at the disk screen shows that I'm missing 4 of the 8 drives on the LSI. When I go into the LSI config utility, I see all 8 drives. Comparing the serials with the SAS Topology screen shows me that the controller has two drives on each slot and TureNAS is only seeing one. It lists Slots 28-31, each with two drives. camcontrol devlist shows the same drives as the disks menu.
The only thing that has changed is replacing the 2008 with the 2308 so I'm assuming I have a setting set incorrectly in the config, but I can't seem to find it. I've reset all of the LSI configs to default.
Any suggestions?
I picked up a 2308 and flashed it to the latest IT firmware (20.00.07.00-IT) on a different machine. Then I swapped out the 2008 for the 2308.
When log into TrueNAS Core, my pool doesn't show up and looking at the disk screen shows that I'm missing 4 of the 8 drives on the LSI. When I go into the LSI config utility, I see all 8 drives. Comparing the serials with the SAS Topology screen shows me that the controller has two drives on each slot and TureNAS is only seeing one. It lists Slots 28-31, each with two drives. camcontrol devlist shows the same drives as the disks menu.
The only thing that has changed is replacing the 2008 with the 2308 so I'm assuming I have a setting set incorrectly in the config, but I can't seem to find it. I've reset all of the LSI configs to default.
Any suggestions?