freenasjacko
Cadet
- Joined
- Feb 29, 2020
- Messages
- 1
Hi all,
I'm new here as a member, but I have been reading posts from this forum for a couple years. I have a major issue with my FreeNas server and I have no idea how to solve it. I built a FreeNas server a couple years ago and have had almost 0 problems with it, up until yesterday. I use my server as a media center and yesterday afternoon, Plex became sluggish and eventually useless. I checked the output and there was a constant stream of messages that I do not fully understand. To be completely honest, I do not have much experience with FreeNas and any help you can throw my way would be greatly appreciated. Thank you in advance for reading!
The error messages are as follows:
"terminated ioc 804b scsi0 state c xfer 0
(probe0:mps0:0:3:0): INQUIRY CDB: 12 00 00 00 24 00 length 36 SMID 161
"terminated ioc 804b scsi0 state c xfer 0
(probe1:mps0:0:3:0): INQUIRY CDB: 12 00 00 00 24 00 length 36 SMID 162"
It repeats this message endlessly. There is no remote access to the GUI, cannot see it on the network, and this message is all it does right now.
My build is as follows:
FreeBSD 9.3
SUPERMICRO MBD-X10SL7-F-O
Intel Xeon E3-1231V3 Haswell 3.4 GHz LGA 1150 80W BX80646E31231V3 Server Processor
32GB-SAMSUNG 8GB 240-Pin DDR3 SDRAM ECC Registered DDR3 1333 Server Memory Model M393B1K70CH0-YH9 -
SeaSonic M12II 620 Bronze 620W ATX12V V2.3 / EPS 12V V2.91 SLI Ready 80 PLUS BRONZE Certified Full Modular Active PFC
4-Seagate NAS HDD ST4000VN000 4TB 64MB Cache SATA 6.0Gb/s Internal Hard Drive
Again, I have limited experience with this machine so I am unsure how to troubleshoot this issue.
Thanks for reading!
I'm new here as a member, but I have been reading posts from this forum for a couple years. I have a major issue with my FreeNas server and I have no idea how to solve it. I built a FreeNas server a couple years ago and have had almost 0 problems with it, up until yesterday. I use my server as a media center and yesterday afternoon, Plex became sluggish and eventually useless. I checked the output and there was a constant stream of messages that I do not fully understand. To be completely honest, I do not have much experience with FreeNas and any help you can throw my way would be greatly appreciated. Thank you in advance for reading!
The error messages are as follows:
"terminated ioc 804b scsi0 state c xfer 0
(probe0:mps0:0:3:0): INQUIRY CDB: 12 00 00 00 24 00 length 36 SMID 161
"terminated ioc 804b scsi0 state c xfer 0
(probe1:mps0:0:3:0): INQUIRY CDB: 12 00 00 00 24 00 length 36 SMID 162"
It repeats this message endlessly. There is no remote access to the GUI, cannot see it on the network, and this message is all it does right now.
My build is as follows:
FreeBSD 9.3
SUPERMICRO MBD-X10SL7-F-O
Intel Xeon E3-1231V3 Haswell 3.4 GHz LGA 1150 80W BX80646E31231V3 Server Processor
32GB-SAMSUNG 8GB 240-Pin DDR3 SDRAM ECC Registered DDR3 1333 Server Memory Model M393B1K70CH0-YH9 -
SeaSonic M12II 620 Bronze 620W ATX12V V2.3 / EPS 12V V2.91 SLI Ready 80 PLUS BRONZE Certified Full Modular Active PFC
4-Seagate NAS HDD ST4000VN000 4TB 64MB Cache SATA 6.0Gb/s Internal Hard Drive
Again, I have limited experience with this machine so I am unsure how to troubleshoot this issue.
Thanks for reading!
