nastest.local.nastest daily security run output error with log

Status
Not open for further replies.

patrick sullivan

Contributor
Joined
Jun 8, 2014
Messages
117
errors toward the end....

nastest.local.nastest kernel log messages:
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 91 b8 00 01 00 00 length 131072 SMID 119 terminated ioc 804b loginfo 31120310 scsi 0 state c xfer 0
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 90 b8 00 01 00 00 length 131072 SMID 749 terminated ioc 804b loginfo 31120310 s(da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 91 b8 00 01 00 00
> csi 0 state c xfer 0
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8f b8 00 01 00 00 length 131072 SMID 346 terminated ioc 804b loginfo 31120310 scsi 0 state c xfer 0
> (da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2: (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8e b8 00 01 00 00 length 131072 SMID 86 terminated ioc 804b loginfo 31120310 scmps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 90 b8 00 01 00 00
> si 0 state c xfer 0
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8d b8 00 01 00 00 length 131072 SMID 159 terminated ioc 804b loginfo 31120310 scsi 0 state c xfer 0
> (da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8f b8 00 01 00 00
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8c b8 00 01 00 00 length 131072 SMID 123 terminated ioc 804b loginfo 31120310 scsi 0 state c xfer 0
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8b b8 00 01 00 00 length 131072 SMID 1011 terminated ioc 804b loginfo 31120310 scsi 0 state c xfer 0
> (da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2: (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8a b8 00 01 00 00 length 131072 SMID 745 terminated ioc 804b loginfo 31120310 scsi 0 state c xfer 0
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 89 b0 00 01 00 00 length 131072 SMID 968 terminated ioc 804b loginfo 31120310 smps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8e b8 00 01 00 00
> csi 0 state c xfer 0
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 88 b0 00 01 00 00 length 131072 SMID 122 terminated ioc 804b loginfo 31120310 s(da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8d b8 00 01 00 00
> csi 0 state c xfer 0
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 87 b0 00 01 00 00 length 131072 SMID 893 terminated ioc 804b loginfo 31120310 s(da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8c b8 00 01 00 00
> csi 0 state c xfer 0
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 86 b0 00 01 00 00 length 131072 SMID 246 terminated ioc 804b loginfo 31120310 scsi 0 state c xfer 0
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 85 b0 00 01 00 00 length 131072 SMID 711 terminated ioc 804b loginfo 31120310 s(da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8b b8 00 01 00 00
> csi 0 state c xfer 0
> (da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 8a b8 00 01 00 00
> (da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 89 b0 00 01 00 00
> (da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 88 b0 00 01 00 00
> (da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 87 b0 00 01 00 00
> (da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 86 b0 00 01 00 00
> (da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 85 b0 00 01 00 00
> (da2:mps0:0:10:0): CAM status: CCB request completed with an error
> (da2:mps0:0:10:0): Retrying command
> (da2:mps0:0:10:0): READ(10). CDB: 28 00 4f 27 86 b0 00 01 00 00
> (da2:mps0:0:10:0): CAM status: SCSI Status Error
> (da2:mps0:0:10:0): SCSI status: Check Condition
> (da2:mps0:0:10:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
> (da2:mps0:0:10:0): Retrying command (per sense data)

-- End of security output --
 

DrKK

FreeNAS Generalissimo
Joined
Oct 15, 2013
Messages
3,630
You would appear to be having an extreme problem with da2.

Let us see the complete output of
Code:
smartctl -qnoserial -x /dev/da2
 

DrKK

FreeNAS Generalissimo
Joined
Oct 15, 2013
Messages
3,630
I'm not reading that.

Sir, please cut-and-paste that textual information, and place in "code" tags.
 

patrick sullivan

Contributor
Joined
Jun 8, 2014
Messages
117
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)

Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===

Model Family: HGST Deskstar NAS

Device Model: HGST HDN724040ALE640

Firmware Version: MJAOA5E0

User Capacity: 4,000,787,030,016 bytes [4.00 TB]

Sector Sizes: 512 bytes logical, 4096 bytes physical

Rotation Rate: 7200 rpm

Form Factor: 3.5 inches

Device is: In smartctl database [for details use: -P show]

ATA Version is: ATA8-ACS T13/1699-D revision 4

SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)

Local Time is: Wed Oct 17 22:20:55 2018 PDT

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

AAM feature is: Unavailable

APM feature is: Disabled

Rd look-ahead is: Enabled

Write cache is: Enabled

DSN feature is: Unavailable

ATA Security is: Disabled, NOT FROZEN [SEC1]

Wt Cache Reorder: Enabled

:
=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.
Total time to complete Offline data collection: ( 24) seconds.

Offline data collection capabilities: (0x5b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new command.

Offline surface scan supported.

Self-test supported.

No Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode.
:
Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine recommended polling time: ( 565) minutes.

SCT capabilities: (0x003d) SCT Status supported.

SCT Error Recovery Control supported.

SCT Feature Control supported.

SCT Data Table supported.
SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE

1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0

2 Throughput_Performance P-S--- 136 136 054 - 81

3 Spin_Up_Time POS--- 124 124 024 - 625 (Average 624)

4 Start_Stop_Count -O--C- 100 100 000 - 23

5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0

7 Seek_Error_Rate PO-R-- 100 100 067 - 0

8 Seek_Time_Performance P-S--- 121 121 020 - 34

9 Power_On_Hours -O--C- 095 095 000 - 35276

10 Spin_Retry_Count PO--C- 100 100 060 - 0

:

12 Power_Cycle_Count -O--CK 100 100 000 - 23

192 Power-Off_Retract_Count -O--CK 100 100 000 - 1062

193 Load_Cycle_Count -O--C- 100 100 000 - 1062

194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 14/45)

196 Reallocated_Event_Count -O--CK 100 100 000 - 0

197 Current_Pending_Sector -O---K 100 100 000 - 0

198 Offline_Uncorrectable ---R-- 100 100 000 - 0

199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0

||||||_ K auto-keep

|||||__ C event count

||||___ R error rate

|||____ S speed/performance

||_____ O updated online

|______ P prefailure warning



General Purpose Log Directory Version 1

SMART Log Directory Version 1 [multi-sector log support]

Address Access R/W Size Description

0x00 GPL,SL R/O 1 Log Directory

0x01 SL R/O 1 Summary SMART error log

0x03 GPL R/O 1 Ext. Comprehensive SMART error log

0x04 GPL R/O 7 Device Statistics log

0x06 SL R/O 1 SMART self-test log

0x07 GPL R/O 1 Extended self-test log

:



0x08 GPL R/O 2 Power Conditions log

0x09 SL R/W 1 Selective self-test log

0x10 GPL R/O 1 NCQ Command Error log

0x11 GPL R/O 1 SATA Phy Event Counters log

0x20 GPL R/O 1 Streaming performance log [OBS-8]

0x21 GPL R/O 1 Write stream error log

0x22 GPL R/O 1 Read stream error log

0x80-0x9f GPL,SL R/W 16 Host vendor specific log

0xe0 GPL,SL R/W 1 SCT Command/Status

0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)

No Errors Logged


SMART Extended Self-test Log Version: 1 (1 sectors)

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Extended offline Completed without error 00% 16112 -

# 2 Short offline Completed without error 00% 15786 -

# 3 Extended offline Completed without error 00% 15700 -

# 4 Short offline Completed without error 00% 15618 -

# 5 Short offline Completed without error 00% 15450 -

# 6 Extended offline Completed without error 00% 15364 -

# 7 Short offline Completed without error 00% 15282 -

# 8 Extended offline Completed without error 00% 15021 -

:



# 9 Extended offline Completed without error 00% 14685 -

#10 Extended offline Completed without error 00% 14277 -

#11 Extended offline Completed without error 00% 13941 -

#12 Short offline Completed without error 00% 13643 -

#13 Extended offline Completed without error 00% 13557 -

#14 Short offline Completed without error 00% 13475 -

#15 Short offline Completed without error 00% 13307 -

#16 Extended offline Completed without error 00% 13221 -

#17 Short offline Completed without error 00% 13139 -

#18 Extended offline Completed without error 00% 12813 -

#19 Extended offline Completed without error 00% 12478 -



SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.



SCT Status Version: 3

:



SCT Version (vendor specific): 256 (0x0100)

SCT Support Level: 1

Device State: Active (0)

Current Temperature: 33 Celsius

Power Cycle Min/Max Temperature: 15/43 Celsius

Lifetime Min/Max Temperature: 14/45 Celsius

Under/Over Temperature Limit Count: 0/0



SCT Temperature History Version: 2

Temperature Sampling Period: 1 minute

Temperature Logging Interval: 1 minute

Min/Max recommended Temperature: 0/60 Celsius

Min/Max Temperature Limit: -40/70 Celsius

Temperature History Size (Index): 128 (98)



Index Estimated Time Temperature Celsius

99 2018-10-17 20:13 35 ****************

... ..( 57 skipped). .. ****************

29 2018-10-17 21:11 35 ****************

30 2018-10-17 21:12 34 ***************

31 2018-10-17 21:13 34 ***************

32 2018-10-17 21:14 35 ****************

33 2018-10-17 21:15 35 ****************

34 2018-10-17 21:16 34 ***************

:



... ..( 54 skipped). .. ***************

89 2018-10-17 22:11 34 ***************

90 2018-10-17 22:12 33 **************

91 2018-10-17 22:13 34 ***************

92 2018-10-17 22:14 34 ***************

93 2018-10-17 22:15 34 ***************

94 2018-10-17 22:16 33 **************

95 2018-10-17 22:17 34 ***************

96 2018-10-17 22:18 33 **************

97 2018-10-17 22:19 33 **************

98 2018-10-17 22:20 34 ***************



SCT Error Recovery Control:

Read: Disabled

Write: Disabled



Device Statistics (GP Log 0x04)

Page Offset Size Value Flags Description

0x01 ===== = = === == General Statistics (rev 2) ==

0x01 0x008 4 23 --- Lifetime Power-On Resets

0x01 0x018 6 26883468424 --- Logical Sectors Written

0x01 0x020 6 698167270 --- Number of Write Commands

0x01 0x028 6 282136907858 --- Logical Sectors Read

0x01 0x030 6 2389929531 --- Number of Read Commands

:

0x03 ===== = = === == Rotating Media Statistics (rev 1) ==

0x03 0x008 4 35271 --- Spindle Motor Power-on Hours

0x03 0x010 4 35271 --- Head Flying Hours

0x03 0x018 4 1062 --- Head Load Events

0x03 0x020 4 0 --- Number of Reallocated Logical Sectors

0x03 0x028 4 0 --- Read Recovery Attempts

0x03 0x030 4 0 --- Number of Mechanical Start Failures

0x04 ===== = = === == General Errors Statistics (rev 1) ==

0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors

0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion

0x05 ===== = = === == Temperature Statistics (rev 1) ==

0x05 0x008 1 34 --- Current Temperature

0x05 0x010 1 34 N-- Average Short Term Temperature

0x05 0x018 1 33 N-- Average Long Term Temperature

0x05 0x020 1 45 --- Highest Temperature

0x05 0x028 1 14 --- Lowest Temperature

0x05 0x030 1 42 N-- Highest Average Short Term Temperature

0x05 0x038 1 25 N-- Lowest Average Short Term Temperature

0x05 0x040 1 38 N-- Highest Average Long Term Temperature

0x05 0x048 1 25 N-- Lowest Average Long Term Temperature

0x05 0x050 4 0 --- Time in Over-Temperature

0x05 0x058 1 60 --- Specified Maximum Operating Temperature

0x05 0x060 4 0 --- Time in Under-Temperature

0x05 0x068 1 0 --- Specified Minimum Operating Temperature

:



0x06 ===== = = === == Transport Statistics (rev 1) ==

0x06 0x008 4 187 --- Number of Hardware Resets

0x06 0x010 4 184 --- Number of ASR Events

0x06 0x018 4 0 --- Number of Interface CRC Errors

|||_ C monitored condition met

||__ D supports DSN

|___ N normalized value



Pending Defects log (GP Log 0x0c) not supported



SATA Phy Event Counters (GP Log 0x11)

ID Size Value Description

0x0001 2 0 Command failed due to ICRC error

0x0002 2 0 R_ERR response for data FIS

0x0003 2 0 R_ERR response for device-to-host data FIS

0x0004 2 0 R_ERR response for host-to-device data FIS

0x0005 2 0 R_ERR response for non-data FIS

0x0006 2 0 R_ERR response for device-to-host non-data FIS

0x0007 2 0 R_ERR response for host-to-device non-data FIS

0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy

0x000a 2 17 Device-to-host register FISes sent due to a COMRESET

0x000b 2 0 CRC errors within host-to-device FIS

0x000d 2 0 Non-CRC errors within host-to-device FIS



END
 
Last edited:
Status
Not open for further replies.
Top