11-3 stable updated zpool, now all dead drives

F

frankccc123

Cadet
Joined
Jan 18, 2017
Messages
6
So, upgraded the pool to 11-3 , all was ok.

Upgraded a few drives, (4TB's to 8TB's.. ) all ok.
Upgraded drives ( from the system -> pool -> poolname -> upgrade zpool

Now when i replace old 4tb's to new 8tbs i get weird CAM errors and ejects.. i tried 2 new 8tb DRIVEs, same thing happens.

i usually do ( offline old drive ) / identify dd if=/dev/da4 of=/dev/null / switch drive / go back in pool and status -> replace disk with replaced.. wait till resilver done and rinse/repeat

It still resilvering so it could be a false positive ?


Code:
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): Retrying command (per sense data)
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): READ(16). CDB: 88 00 00 00 00 03 a3 81 2a 87 00 00 00 01 00 00
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): CAM status: SCSI Status Error
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): SCSI status: Check Condition
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): SCSI sense: NOT READY asc:4,0 (Logical unit not ready, cause not reportable)
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): Retrying command (per sense data)
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): READ(16). CDB: 88 00 00 00 00 03 a3 81 2a 87 00 00 00 01 00 00
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): CAM status: SCSI Status Error
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): SCSI status: Check Condition
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): SCSI sense: NOT READY asc:4,0 (Logical unit not ready, cause not reportable)
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): Retrying command (per sense data)
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): READ(16). CDB: 88 00 00 00 00 03 a3 81 2a 87 00 00 00 01 00 00
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): CAM status: SCSI Status Error
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): SCSI status: Check Condition
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): SCSI sense: NOT READY asc:4,0 (Logical unit not ready, cause not reportable)
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): Retrying command (per sense data)
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): READ(16). CDB: 88 00 00 00 00 03 a3 81 2a 87 00 00 00 01 00 00
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): CAM status: SCSI Status Error
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): SCSI status: Check Condition
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): SCSI sense: NOT READY asc:4,0 (Logical unit not ready, cause not reportable)
Mar 19 12:22:28 freenas (da4:mps0:0:15:0): Error 5, Retries exhausted
Mar 19 12:22:28 freenas GEOM_PART: da4 was automatically resized.
Mar 19 12:22:28 freenas Use `gpart commit da4` to save changes or `gpart undo da4` to revert them.
Mar 19 12:22:28 freenas GEOM_PART: integrity check failed (da4, GPT)
Mar 19 12:22:55 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 1027 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 19 12:22:55 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 633 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 19 12:23:08 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 698 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 19 12:23:08 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 906 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 19 12:23:30 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 40 00 length 64 SMID 740 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 19 12:23:30 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 40 00 length 64 SMID 221 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 19 12:23:30 freenas smartd[77450]: Device: /dev/da18 [SAT], previous self-test completed with error (read test element)
Mar 19 12:23:40 freenas         (pass4:mps0:0:15:0): LOG SENSE. CDB: 4d 00 0d 00 00 00 00 00 40 00 length 64 SMID 878 Aborting command 0xfffffe0001b89060
Mar 19 12:23:40 freenas mps0: Sending reset from mpssas_send_abort for target ID 15
Mar 19 12:23:44 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 922 terminated ioc 804b loginfo 31130000 scsi 0 state c xfer 0
Mar 19 12:23:44 freenas mps0: Unfreezing devq for target ID 15
Mar 19 12:23:45 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 40 00 length 64 SMID 153 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 19 12:23:45 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 93 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 19 12:24:07 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 185 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 19 12:24:07 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 40 00 length 64 SMID 873 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 19 12:24:14 freenas         (pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 40 00 length 64 SMID 671 terminated ioc 804b loginfo 31170000 scsi 0 state c xfer 0
Mar 19 12:24:15 freenas smartd[77630]: Device: /dev/da18 [SAT], previous self-test completed with error (read test element)
Mar 19 12:24:16 freenas mps0: mpssas_prepare_remove: Sending reset for target ID 15
Mar 19 12:24:16 freenas da4 at mps0 bus 0 scbus4 target 15 lun 0
Mar 19 12:24:16 freenas da4: <ATA WDC WD80EFAX-68K 0A81> s/n VDH2KXJD             detached
Mar 19 12:24:16 freenas (da4:mps0:0:15:0): Periph destroyed
Mar 19 12:24:16 freenas mps0: Unfreezing devq for target ID 15



tail /etc/version
FreeNAS-11.3-U1 (34d6357440)



pool: PoolA
state: DEGRADED
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Thu Mar 19 12:18:22 2020
8.72T scanned at 1.36G/s, 7.65T issued at 1.19G/s, 8.72T total
4.55G resilvered, 87.69% done, 0 days 00:15:22 to go
config:

NAME STATE READ WRITE CKSUM
PoolA DEGRADED 0 0 0
mirror-0 ONLINE 0 0 0
gptid/6ae8613a-bf28-11e6-ab55-0007431120a0 ONLINE 0 0 0
gptid/6c6f3036-bf28-11e6-ab55-0007431120a0 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
gptid/937ca693-63d6-11ea-81da-002590869f2c ONLINE 0 0 0
gptid/bc8fc2ff-5fd1-11ea-81da-002590869f2c ONLINE 0 0 0
mirror-2 ONLINE 0 0 0
gptid/24a7b88e-6704-11ea-81da-002590869f2c ONLINE 0 0 0
gptid/30a3a92b-677d-11ea-81da-002590869f2c ONLINE 0 0 0
mirror-3 DEGRADED 0 0 0
replacing-0 UNAVAIL 0 116 0
2723124035927452247 OFFLINE 0 0 0 was /dev/gptid/726efb5b-bf28-11e6-ab55-0007431120a0
gptid/1bc5bf7c-69fb-11ea-81da-002590869f2c FAULTED 0 299 0 too many errors
gptid/73a0bf77-bf28-11e6-ab55-0007431120a0 ONLINE 0 0 0
mirror-4 ONLINE 0 0 0
gptid/3d130c39-458d-11e9-a690-002590869f2c ONLINE 0 0 0
gptid/070a72f6-5e4f-11ea-bf3c-002590869f2c ONLINE 0 0 0

errors: No known data errors





root@freenas:~ # camcontrol devlist
<ATA WDC WD40EFRX-68W 0A82> at scbus4 target 5 lun 0 (pass5,da5)
<ATA WDC WD40EFRX-68N 0A82> at scbus4 target 8 lun 0 (pass6,da6)
<ATA WDC WD80EFAX-68K 0A81> at scbus4 target 9 lun 0 (pass7,da7)
<ATA WDC WD80EFAX-68K 0A81> at scbus4 target 10 lun 0 (da1,pass1)
<ATA WDC WD80EFAX-68K 0A81> at scbus4 target 11 lun 0 (da0,pass0)
<ATA WDC WD80EFAX-68K 0A81> at scbus4 target 12 lun 0 (da2,pass2)
<ATA WDC WD80EFAX-68K 0A81> at scbus4 target 13 lun 0 (da3,pass3)
<AHCI SGPIO Enclosure 2.00 0001> at scbus11 target 0 lun 0 (ses0,pass8)
<ATA Samsung SSD 850 2B6Q> at scbus12 target 8 lun 0 (pass9,da8)
<ATA INTEL SSDSC2KW12 G200> at scbus12 target 9 lun 0 (pass10,da9)
<ATA INTEL SSDSC2KW12 G200> at scbus12 target 10 lun 0 (pass11,da10)
<HP D2700 SAS AJ941A 0131> at scbus12 target 11 lun 0 (ses1,pass12)
<ATA INTEL SSDSC2KW48 031C> at scbus12 target 12 lun 0 (pass13,da11)
<ATA INTEL SSDSC2KW48 031C> at scbus12 target 13 lun 0 (pass14,da12)
<ATA Samsung SSD 850 2B6Q> at scbus12 target 14 lun 0 (pass15,da13)
<ATA Samsung SSD 850 2B6Q> at scbus12 target 15 lun 0 (pass16,da14)
<ATA Samsung SSD 850 2B6Q> at scbus12 target 16 lun 0 (pass17,da15)
<ATA Samsung SSD 850 2B6Q> at scbus12 target 17 lun 0 (pass18,da16)
<ATA Samsung SSD 850 2B6Q> at scbus12 target 18 lun 0 (pass19,da17)
<ATA WDC WD40EFRX-68W 0A82> at scbus13 target 0 lun 0 (pass20,da18)
<ATA WDC WD40EFRX-68W 0A82> at scbus13 target 1 lun 0 (pass21,da19)
<SanDisk Cruzer Glide 1.00> at scbus15 target 0 lun 0 (pass22,da20)

pciconf -lv

t4iov0@pci0:131:0:0: class=0x020000 card=0x00001425 chip=0x40011425 rev=0x00 hdr=0x00
vendor = 'Chelsio Communications Inc'
device = 'T420-CR Unified Wire Ethernet Controller'
class = network
subclass = ethernet
t4iov1@pci0:131:0:1: class=0x020000 card=0x00001425 chip=0x40011425 rev=0x00 hdr=0x00
vendor = 'Chelsio Communications Inc'
device = 'T420-CR Unified Wire Ethernet Controller'
class = network
subclass = ethernet
t4iov2@pci0:131:0:2: class=0x020000 card=0x00001425 chip=0x40011425 rev=0x00 hdr=0x00
vendor = 'Chelsio Communications Inc'
device = 'T420-CR Unified Wire Ethernet Controller'
class = network
subclass = ethernet
t4iov3@pci0:131:0:3: class=0x020000 card=0x00001425 chip=0x40011425 rev=0x00 hdr=0x00
vendor = 'Chelsio Communications Inc'
device = 'T420-CR Unified Wire Ethernet Controller'
class = network
subclass = ethernet

(da4:mps0:0:15:0): SCSI status: Check Condition
(da4:mps0:0:15:0): SCSI sense: NOT READY asc:4,0 (Logical unit not ready, cause not reportable)
(da4:mps0:0:15:0): Error 5, Retries exhausted
GEOM_PART: da4 was automatically resized.
Use `gpart commit da4` to save changes or `gpart undo da4` to revert them.
GEOM_PART: integrity check failed (da4, GPT)
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 1027 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 633 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 698 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 906 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 40 00 length 64 SMID 740 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 40 00 length 64 SMID 221 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
(pass4:mps0:0:15:0): LOG SENSE. CDB: 4d 00 0d 00 00 00 00 00 40 00 length 64 SMID 878 Aborting command 0xfffffe0001b89060
mps0: Sending reset from mpssas_send_abort for target ID 15
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 922 terminated ioc 804b loginfo 31130000 scsi 0 state c xfer 0
mps0: Unfreezing devq for target ID 15
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 40 00 length 64 SMID 153 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 93 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 185 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 40 00 length 64 SMID 873 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
(pass4:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 40 00 length 64 SMID 671 terminated ioc 804b loginfo 31170000 scsi 0 state c xfer 0
mps0: mpssas_prepare_remove: Sending reset for target ID 15
da4 at mps0 bus 0 scbus4 target 15 lun 0
da4: <ATA WDC WD80EFAX-68K 0A81> s/n VDH2KXJD detached
(da4:mps0:0:15:0): Periph destroyed
mps0: Unfreezing devq for target ID 15
 
T

tfran1990

Patron
Joined
Oct 18, 2017
Messages
294
Did you test the drives before you put them in?
CAM status is almost always is connection related.(cable,HBA,backplane)

what does the smart data say smartctl - a /dev/da4
 
F

frankccc123

Cadet
Joined
Jan 18, 2017
Messages
6
tfran1990 said:
Did you test the drives before you put them in?
CAM status is almost always is connection related.(cable,HBA,backplane)

what does the smart data say smartctl - a /dev/da4
Click to expand...

yes htey wrok perfectly if i use them in a new vdev / pool ... but if i replace an upgraded pool they dont.
 
F

frankccc123

Cadet
Joined
Jan 18, 2017
Messages
6
seems once they where UPGRADED the disks become unusable ...

i removed DA4 and DA7 from pool A


i created new pool BACKUPS with these 2 drives, NOW

Code:
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): SCSI sense: NOT READY asc:4,0 (Logical unit not ready, cause not reportable)
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): Retrying command (per sense data)
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): READ(10). CDB: 28 00 00 40 00 81 00 00 01 00
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): CAM status: SCSI Status Error
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): SCSI status: Check Condition
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): SCSI sense: NOT READY asc:4,0 (Logical unit not ready, cause not reportable)
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): Retrying command (per sense data)
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): READ(10). CDB: 28 00 00 40 00 81 00 00 01 00
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): CAM status: SCSI Status Error
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): SCSI status: Check Condition
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): SCSI sense: NOT READY asc:4,0 (Logical unit not ready, cause not reportable)
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): Error 5, Retries exhausted
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): READ(10). CDB: 28 00 00 40 00 80 00 00 01 00
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): CAM status: SCSI Status Error
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): SCSI status: Check Condition
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): SCSI sense: NOT READY asc:4,0 (Logical unit not ready, cause not reportable)
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): Retrying command (per sense data)
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): READ(10). CDB: 28 00 00 40 00 80 00 00 01 00
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): CAM status: SCSI Status Error
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): SCSI status: Check Condition
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): SCSI sense: NOT READY asc:4,0 (Logical unit not ready, cause not reportable)
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): Retrying command (per sense data)
Mar 23 10:08:18 freenas (da7:mps0:0:15:0): READ(10). CDB: 28 00 00 40 00 80 00 00 01 00

...

Mar 23 10:08:18 freenas (da7:mps0:0:15:0): Error 5, Retries exhausted
Mar 23 10:08:18 freenas GEOM_PART: da7 was automatically resized.
Mar 23 10:08:18 freenas Use `gpart commit da7` to save changes or `gpart undo da7` to revert them.
Mar 23 10:08:18 freenas GEOM_PART: integrity check failed (da7, GPT)
Mar 23 10:08:43 freenas         (pass7:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 862 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 23 10:08:43 freenas         (pass7:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 855 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 23 10:09:44 freenas collectd[2104]: Traceback (most recent call last):
  File "/usr/local/lib/collectd_pyplugins/disktemp.py", line 66, in read
    temperatures = c.call('disk.temperatures', self.disks, self.powermode, self.smartctl_args)
  File "/usr/local/lib/collectd_pyplugins/disktemp.py", line 66, in read
    temperatures = c.call('disk.temperatures', self.disks, self.powermode, self.smartctl_args)
  File "/usr/local/lib/python3.7/site-packages/middlewared/client/client.py", line 500, in call
    raise CallTimeout("Call timeout")
middlewared.client.client.CallTimeout: Call timeout
Mar 23 10:09:44 freenas         (pass7:mps0:0:15:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 583 Aborting command 0xfffffe0001b6fd30
Mar 23 10:09:44 freenas mps0: Sending reset from mpssas_send_abort for target ID 15
Mar 23 10:09:44 freenas mps0: mpssas_action_scsiio: Freezing devq for target ID 15
Mar 23 10:09:44 freenas mps0: mpssas_action_scsiio: Freezing devq for target ID 15
Mar 23 10:09:45 freenas mps0: mpssas_action_scsiio: Freezing devq for target ID 15
Mar 23 10:09:45 freenas mps0: mpssas_action_scsiio: Freezing devq for target ID 15
Mar 23 10:09:45 freenas mps0: mpssas_action_scsiio: Freezing devq for target ID 15
Mar 23 10:09:45 freenas mps0: mpssas_action_scsiio: Freezing devq for target ID 15
Mar 23 10:09:46 freenas mps0: mpssas_action_scsiio: Freezing devq for target ID 15
Mar 23 10:09:46 freenas mps0: mpssas_action_scsiio: Freezing devq for target ID 15
Mar 23 10:09:46 freenas mps0: mpssas_action_scsiio: Freezing devq for target ID 15
Mar 23 10:09:46 freenas mps0: mpssas_action_scsiio: Freezing devq for target ID 15
Mar 23 10:09:48 freenas         (pass7:mps0:0:15:0): ATA COMMAND PASS THROUGH(16). CDB: 85 06 00 00 00 00 00 00 00 00 00 00 00 40 e3 00 length 0 SMID 85 terminated ioc 804b loginfo 31130000 scsi 0 state c xfer 0
Mar 23 10:09:48 freenas mps0: Unfreezing devq for target ID 15
Mar 23 10:09:57 freenas mps0: mpssas_prepare_remove: Sending reset for target ID 15
Mar 23 10:09:57 freenas da7 at mps0 bus 0 scbus4 target 15 lun 0
Mar 23 10:09:57 freenas da7: <ATA WDC WD80EFAX-68K 0A81> s/n VDH2KXJD             detached
Mar 23 10:09:57 freenas (da7:mps0:0:15:0): Periph destroyed
Mar 23 10:09:57 freenas mps0: Unfreezing devq for target ID 15
Mar 23 10:10:06 freenas mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47
Mar 23 10:10:06 freenas mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47
Mar 23 10:10:06 freenas mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47
Mar 23 10:10:06 freenas mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47
Mar 23 10:10:06 freenas mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47
Mar 23 10:10:06 freenas mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47
Mar 23 10:10:06 freenas mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47
Mar 23 10:10:06 freenas mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47
Mar 23 10:10:06 freenas mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47
Mar 23 10:10:06 freenas mpssas_get_sata_identify: error reading SATA PASSTHRU; iocstatus = 0x47
Mar 23 10:10:06 freenas mps0: mpssas_add_device: failed to get disk type (SSD or HDD) for SATA device with handle 0x0009
Mar 23 10:10:07 freenas         (probe0:mps0:0:16:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 688 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 23 10:10:07 freenas (probe0:mps0:0:16:0): INQUIRY. CDB: 12 00 00 00 24 00
Mar 23 10:10:07 freenas (probe0:mps0:0:16:0): CAM status: CCB request completed with an error
Mar 23 10:10:07 freenas (probe0:mps0:0:16:0): Retrying command
Mar 23 10:10:08 freenas         (probe0:mps0:0:16:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 443 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 23 10:10:08 freenas (probe0:mps0:0:16:0): INQUIRY. CDB: 12 00 00 00 24 00
Mar 23 10:10:08 freenas (probe0:mps0:0:16:0): CAM status: CCB request completed with an error
Mar 23 10:10:08 freenas (probe0:mps0:0:16:0): Retrying command
Mar 23 10:10:09 freenas         (probe0:mps0:0:16:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 114 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 23 10:10:09 freenas (probe0:mps0:0:16:0): INQUIRY. CDB: 12 00 00 00 24 00
Mar 23 10:10:09 freenas (probe0:mps0:0:16:0): CAM status: CCB request completed with an error
Mar 23 10:10:09 freenas (probe0:mps0:0:16:0): Retrying command
Mar 23 10:10:11 freenas         (probe0:mps0:0:16:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 429 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 23 10:10:11 freenas (probe0:mps0:0:16:0): INQUIRY. CDB: 12 00 00 00 24 00
Mar 23 10:10:11 freenas (probe0:mps0:0:16:0): CAM status: CCB request completed with an error
Mar 23 10:10:11 freenas (probe0:mps0:0:16:0): Retrying command
Mar 23 10:10:12 freenas         (probe0:mps0:0:16:0): INQUIRY. CDB: 12 00 00 00 24 00 length 36 SMID 479 terminated ioc 804b loginfo 31111000 scsi 0 state c xfer 0
Mar 23 10:10:12 freenas (probe0:mps0:0:16:0): INQUIRY. CDB: 12 00 00 00 24 00
Mar 23 10:10:12 freenas (probe0:mps0:0:16:0): CAM status: CCB request completed with an error
Mar 23 10:10:12 freenas (probe0:mps0:0:16:0): Error 5, Retries exhausted
 
You must log in or register to reply here.

Similar threads

patrick sullivan
  • Locked
nastest.local.nastest daily security run output error with log
Replies
3
Views
938
patrick sullivan
patrick sullivan
R
One or more devices has experienced an unrecoverable error
Replies
3
Views
1K
sretalla
sretalla
J
  • Locked
SOLVED CAM status: SCSI Status Error ABORTED COMMAND NAK received
Replies
4
Views
5K
kdragon75
kdragon75
J
  • Locked
Hard drive really faulty or just cable?
Replies
7
Views
1K
Ericloewe
Ericloewe
R
Help with the following error message:
Replies
12
Views
3K
Jailer
Jailer
Top