Hi,
I've been undertaking burn in tests on a new configuration, before installing FN10.
I'm getting errors on a hard drive, but it seems to have passed extended smart tests and 4 bad block tests. Results shown below.
My question is, should I be looking to RMA the drive given that there are non zero figures for the RAW values, for a number of variables: Raw_Read_Error_Rate, Seek_Error_Rate and Hardware_ECC_Recovered ? The drive is in warranty. But it passes SMART tests?
Any help appreciated.
I've been undertaking burn in tests on a new configuration, before installing FN10.
I'm getting errors on a hard drive, but it seems to have passed extended smart tests and 4 bad block tests. Results shown below.
My question is, should I be looking to RMA the drive given that there are non zero figures for the RAW values, for a number of variables: Raw_Read_Error_Rate, Seek_Error_Rate and Hardware_ECC_Recovered ? The drive is in warranty. But it passes SMART tests?
Any help appreciated.
Code:
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 584) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 231) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 082 066 044 Pre-fail Always - 179193734 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 073 060 030 Pre-fail Always - 25141122 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 126 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 26 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 062 045 Old_age Always - 30 (Min/Max 15/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 22 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 35 194 Temperature_Celsius 0x0022 030 040 000 Old_age Always - 30 (0 14 0 0 0) 195 Hardware_ECC_Recovered 0x001a 022 016 000 Old_age Always - 179193734 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 114 - # 2 Extended offline Completed without error 00% 77 - # 3 Short offline Completed without error 00% 73 -
Last edited by a moderator: