kanecharles92
Cadet
- Joined
- Apr 11, 2013
- Messages
- 7
Hi,
I have faced a strange issue as of the past few days where any time I perform a clone activity on my ESXi host (Dell r710) it will essentially stun the entire host for 700-900 seconds.
Here is a bit more background on my environment:
Server: Dell r710
NAS: Infortrend EonNAS PRO 850-2 running FreeNAS-9.10.2-U3 (e1497f269)
Both systems are directly connected (no switch) using DAC cables between an x520-da2 on each system.
The 2 x Crucial MX300 525GB SSDs (shown below) are together to make a 1050GB iSCSI Datastore, this is the Datastore that is causing issues. I am cloning to/from the same datastore.
I have never had any issues with this previously, and only recently started having issues now. I can power on VMs and do regular tasks with no problems, it's only when I am cloning a VM that it stuns the host and eventually fails the clone operation.
I have noticed that there is a lot of SCSI Sense Code spam on the physical console monitor connected to my NAS, which is something I've not seen before; these will only present themselves when I attempt a clone operation.
I have also noticed that the 10GbE interfaces (ix0, ix1) are flipping a bit.
Attached are some relevant logs.
Here is some extra output that may be useful:
I have faced a strange issue as of the past few days where any time I perform a clone activity on my ESXi host (Dell r710) it will essentially stun the entire host for 700-900 seconds.
Here is a bit more background on my environment:
Server: Dell r710
NAS: Infortrend EonNAS PRO 850-2 running FreeNAS-9.10.2-U3 (e1497f269)
Both systems are directly connected (no switch) using DAC cables between an x520-da2 on each system.
The 2 x Crucial MX300 525GB SSDs (shown below) are together to make a 1050GB iSCSI Datastore, this is the Datastore that is causing issues. I am cloning to/from the same datastore.
I have never had any issues with this previously, and only recently started having issues now. I can power on VMs and do regular tasks with no problems, it's only when I am cloning a VM that it stuns the host and eventually fails the clone operation.
I have noticed that there is a lot of SCSI Sense Code spam on the physical console monitor connected to my NAS, which is something I've not seen before; these will only present themselves when I attempt a clone operation.
I have also noticed that the 10GbE interfaces (ix0, ix1) are flipping a bit.
Attached are some relevant logs.
Here is some extra output that may be useful:
Code:
[root@freenas] /var/log# zpool status pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0h5m with 0 errors on Wed Sep 13 03:19:12 2017 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 gptid/a648eab9-bac9-11e6-b688-888888888888 ONLINE 0 0 0 errors: No known data errors pool: ssd1050 state: ONLINE scan: scrub repaired 0 in 0h28m with 0 errors on Sun Aug 20 00:28:50 2017 config: NAME STATE READ WRITE CKSUM ssd1050 ONLINE 0 0 0 gptid/78f597c9-c4ef-11e6-9802-888888888888 ONLINE 0 0 0 gptid/7947b50b-c4ef-11e6-9802-888888888888 ONLINE 0 0 0 logs mirror-2 ONLINE 0 0 0 gptid/79973781-c4ef-11e6-9802-888888888888 ONLINE 0 0 0 gptid/79e4dbde-c4ef-11e6-9802-888888888888 ONLINE 0 0 0 errors: No known data errors pool: ssd120 state: ONLINE scan: scrub repaired 0 in 0h0m with 0 errors on Sun Aug 13 00:00:05 2017 config: NAME STATE READ WRITE CKSUM ssd120 ONLINE 0 0 0 gptid/1b1bc380-badb-11e6-9ebc-888888888888 ONLINE 0 0 0 errors: No known data errors
Code:
[root@freenas] /var/log# smartctl -a -q noserial /dev/ada0 smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Crucial/Micron MX1/2/300, M5/600, 1100 Client SSDs Device Model: Crucial_CT525MX300SSD1 Firmware Version: M0CR021 User Capacity: 525,112,713,216 bytes [525 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Sep 14 04:59:46 2017 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x03) Offline data collection activity is in progress. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 705) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 6) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6164 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 18 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Ave_Block-Erase_Count 0x0032 099 099 000 Old_age Always - 26 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 17 183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 074 059 000 Old_age Always - 26 (Min/Max 19/41) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Percent_Lifetime_Used 0x0030 099 099 001 Old_age Offline - 1 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 246 Total_Host_Sector_Write 0x0032 100 100 000 Old_age Always - 9224971207 247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 318853612 248 Bckgnd_Program_Page_Cnt 0x0032 100 100 000 Old_age Always - 173829129 180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 1925 210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0xff) Completed without error 00% 6164 - # 2 Vendor (0xff) Completed without error 00% 6044 - # 3 Reserved (0x19) Aborted by host 90% 6425 - # 4 Reserved (0x18) Aborted by host 80% 6168 - # 5 Reserved (0x18) Aborted by host 80% 6168 - # 6 Reserved (0x18) Aborted by host 80% 6168 - # 7 Reserved (0x18) Aborted by host 80% 6168 - # 8 Reserved (0x19) Aborted by host 90% 6425 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
[root@freenas] /var/log# smartctl -a -q noserial /dev/ada1 smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Crucial/Micron MX1/2/300, M5/600, 1100 Client SSDs Device Model: Crucial_CT525MX300SSD1 Firmware Version: M0CR021 User Capacity: 525,112,713,216 bytes [525 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Sep 14 05:00:16 2017 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x03) Offline data collection activity is in progress. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 727) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 7) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0 5 Reallocate_NAND_Blk_Cnt 0x0032 100 100 010 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6164 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 18 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Ave_Block-Erase_Count 0x0032 099 099 000 Old_age Always - 26 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 18 183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0 184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 074 059 000 Old_age Always - 26 (Min/Max 19/41) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Percent_Lifetime_Used 0x0030 099 099 001 Old_age Offline - 1 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 246 Total_Host_Sector_Write 0x0032 100 100 000 Old_age Always - 9202926991 247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 317888359 248 Bckgnd_Program_Page_Cnt 0x0032 100 100 000 Old_age Always - 172505953 180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 1949 210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0xff) Completed without error 00% 6164 - # 2 Vendor (0xff) Completed without error 00% 6045 - # 3 Reserved (0x17) Aborted by host 70% 5911 - # 4 Reserved (0x17) Aborted by host 70% 5911 - # 5 Reserved (0x16) Aborted by host 60% 5654 - # 6 Reserved (0x16) Aborted by host 60% 5654 - # 7 Reserved (0x16) Aborted by host 60% 5654 - # 8 Reserved (0x16) Aborted by host 60% 5654 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
[root@freenas] /var/log# smartctl -a -q noserial /dev/ada2 smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 840 Series Firmware Version: DXT08B0Q User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Sep 14 05:00:42 2017 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 8075 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 444 177 Wear_Leveling_Count 0x0013 090 090 000 Pre-fail Always - 111 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0032 079 058 000 Old_age Always - 21 195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 243 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 16932685867 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
[root@freenas] /var/log# smartctl -a -q noserial /dev/ada3 smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs Device Model: INTEL SSDSC2BA100G3T Add. Product Id: DELL(tm) Firmware Version: 5DV1DL06 User Capacity: 100,030,242,816 bytes [100 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Sep 14 05:01:17 2017 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 60) minutes. Conveyance self-test routine recommended polling time: ( 60) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 130 130 039 Pre-fail Always - 694771 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 20655 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 54 13 Read_Soft_Error_Rate 0x0032 130 100 000 Old_age Always - 694771 179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 0 180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 19112 181 Program_Fail_Cnt_Total 0x003a 100 100 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x003a 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Internal 0x0022 100 100 000 Old_age Always - 27 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 201 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 532982268554 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 40 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 3 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 1238987 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 44925 245 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2 - # 2 Extended offline Completed without error 00% 1 - # 3 Short offline Completed without error 00% 1 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
[root@freenas] /var/log# smartctl -a -q noserial /dev/ada4 smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs Device Model: INTEL SSDSC2BA100G3T Add. Product Id: DELL(tm) Firmware Version: 5DV1DL06 User Capacity: 100,030,242,816 bytes [100 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Sep 14 05:01:45 2017 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 60) minutes. Conveyance self-test routine recommended polling time: ( 60) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 130 130 039 Pre-fail Always - 689341 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 20653 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 54 13 Read_Soft_Error_Rate 0x0032 130 100 000 Old_age Always - 689341 179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 0 180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 19111 181 Program_Fail_Cnt_Total 0x003a 100 100 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x003a 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Internal 0x0022 100 100 000 Old_age Always - 26 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 7 201 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 532982268565 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 40 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 7 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 1238893 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 43461 245 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2 - # 2 Extended offline Completed without error 00% 1 - # 3 Short offline Completed without error 00% 1 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.