idrone
Cadet
- Joined
- Dec 5, 2017
- Messages
- 5
In the last period I'm experiencing some strange behaviour so i started to worried about the healty of my server.
In particular it happen that i receveid this email error:
I don't know if they are connected but the entire Freenas server remain stucked (cannot access at all from webgui) so i had to reboot the machine.
After rebooting the pool come back ONLINE without any error, to be sure that there are some problems i have looked at SMART but i don't know how to really read at it
This is the report:
In the Attribute table the only strange value is Raw_Read_Error_Rate, but i'have read that is better to look at it too much. While in self test log there are a lot of "Completed: read failure"
Right know I'm running a Long test to have more data available
What do you suggest? The HDD is under warranty until 16 October of this year
In particular it happen that i receveid this email error:
Code:
* Pool media state is UNAVAIL: One or more devices are faulted in response to IO failures.
I don't know if they are connected but the entire Freenas server remain stucked (cannot access at all from webgui) so i had to reboot the machine.
After rebooting the pool come back ONLINE without any error, to be sure that there are some problems i have looked at SMART but i don't know how to really read at it
This is the report:
Code:
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD20EFRX-68EUZN0 Serial Number: WD-XXXXXXXXXXXX LU WWN Device Id: 5 0014ee 20dd140ef Firmware Version: 82.00A82 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Sep 5 21:23:12 2019 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (25980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 263) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 272 3 Spin_Up_Time 0x0027 174 164 021 Pre-fail Always - 4266 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2781 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16098 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 488 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 82 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 7396 194 Temperature_Celsius 0x0022 111 096 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 5 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 16098 9050952 # 2 Short offline Completed: read failure 30% 16047 9050944 # 3 Short offline Completed: read failure 30% 15879 9050952 # 4 Short offline Completed: read failure 30% 15711 9050952 # 5 Short offline Completed without error 00% 15557 - # 6 Short offline Completed: read failure 30% 15389 9050952 # 7 Short offline Completed: read failure 20% 15225 9050952 # 8 Short offline Completed: read failure 20% 15057 9050952 # 9 Short offline Completed: read failure 30% 14889 9189648 #10 Short offline Completed: read failure 30% 14600 9189648 #11 Short offline Completed: read failure 20% 14432 9189648 #12 Short offline Completed: read failure 30% 14096 9189648 #13 Short offline Completed without error 00% 13929 - #14 Short offline Completed: read failure 10% 13593 9193160 #15 Short offline Completed without error 00% 13425 - #16 Short offline Completed without error 00% 13258 - #17 Short offline Completed without error 00% 13090 - #18 Short offline Completed without error 00% 12926 - #19 Short offline Completed without error 00% 12759 - #20 Short offline Completed: read failure 10% 12591 1452010528 #21 Short offline Completed: read failure 20% 12424 9189648 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
In the Attribute table the only strange value is Raw_Read_Error_Rate, but i'have read that is better to look at it too much. While in self test log there are a lot of "Completed: read failure"
Right know I'm running a Long test to have more data available
What do you suggest? The HDD is under warranty until 16 October of this year