I am having an issue where the serial numbers in the GUI for my 6x Sata SSD's are missing/blank.
This is resulting in a duplicated serial number error when trying to add another pool (of unrelated disks).
This may be an issue with TN-13, as i *think* the serial numbers were visible previously. They are setup as mirrors, and i have added a new pair in the past without issues.
My Hardware is a Dell R720, with an IT flashed H310 connected to these 6 disks.
When i look in iDRAC for these disks, it is able to tell me the serial numbers. The serial numbers displayed in iDRAC are unique between the 6 SSD's
When i attempt to make the new pool (HDD's in a disk enclosure), i get the following error:
[EINVAL] pool_create.topology: Disks have duplicate serial numbers: '' (mfisyspd0, mfisyspd1, mfisyspd2, mfisyspd3, mfisyspd4, mfisyspd5).
The TN GUI lists these SSD as mfisyspd0-5 with a blank serial number.
I do not know enough about the shell commands to check any command line options.
Can you please let me know if there is something i can do to fix it, or if a bug report needs to be filed.
If usefull, i could reboot into an old v12 environment to check it.
Current TN version: TrueNAS-13.0-U2
Uptime only 15 hours, as i had shutdown previously when adding the additional disk enclosure
Dell R720, E5-2643, 96GB RAM,
8x single disk raid 0 connected to H710p (Temp storage pool)
6x SSD connected to H310 flashed to IT (VM Storage pool)
12x HDD inside MD1400, connected to H830 in Non-Raid (Main storage pool)
12x HDD inside MD1400, connected to first MD1400 (these are the new disks im trying to use)
This is resulting in a duplicated serial number error when trying to add another pool (of unrelated disks).
This may be an issue with TN-13, as i *think* the serial numbers were visible previously. They are setup as mirrors, and i have added a new pair in the past without issues.
My Hardware is a Dell R720, with an IT flashed H310 connected to these 6 disks.
When i look in iDRAC for these disks, it is able to tell me the serial numbers. The serial numbers displayed in iDRAC are unique between the 6 SSD's
When i attempt to make the new pool (HDD's in a disk enclosure), i get the following error:
[EINVAL] pool_create.topology: Disks have duplicate serial numbers: '' (mfisyspd0, mfisyspd1, mfisyspd2, mfisyspd3, mfisyspd4, mfisyspd5).
The TN GUI lists these SSD as mfisyspd0-5 with a blank serial number.
I do not know enough about the shell commands to check any command line options.
Can you please let me know if there is something i can do to fix it, or if a bug report needs to be filed.
If usefull, i could reboot into an old v12 environment to check it.
Current TN version: TrueNAS-13.0-U2
Uptime only 15 hours, as i had shutdown previously when adding the additional disk enclosure
Dell R720, E5-2643, 96GB RAM,
8x single disk raid 0 connected to H710p (Temp storage pool)
6x SSD connected to H310 flashed to IT (VM Storage pool)
12x HDD inside MD1400, connected to H830 in Non-Raid (Main storage pool)
12x HDD inside MD1400, connected to first MD1400 (these are the new disks im trying to use)