Nightmare
Cadet
- Joined
- Feb 6, 2014
- Messages
- 2
Hi,
I installed FreeNas on a ESXi server with an IP FailOver like this tutorial : http://www.bouthors.fr/wiki/doku.php?id=linux:vmwarededibox:start
Host ESXi IP : 192.99.5.42 => Internet
IP FailOver : 198.100.157.200
After a successful installation, FreeNas show me my IP FailOver adress as :
You may try the following URLs to access the web user interface :
http://0.0.0.0 [em1] (Don't know what is it)
http://198.100.157.200 [em0] (The IP FailOver)
I did :
4) Configured Defaut Route
IPv4: 198.100.157.200 == IP FailOver
IPv6: Empty
5) Configure Static Routes :
Destination Network : 192.99.5.42
Gateway : 192.99.5.254
Description : Empty because it's Optional
6) Configure DNS :
DNS Domain : local
DNS Nameserver 1 : 8.8.8.8
DNS Nameserver 2: EMPTY
DNS Nameserver 3: EMPTY
Did something is wrong on my routes configuration ?
All my best,
Night
I installed FreeNas on a ESXi server with an IP FailOver like this tutorial : http://www.bouthors.fr/wiki/doku.php?id=linux:vmwarededibox:start
Host ESXi IP : 192.99.5.42 => Internet
IP FailOver : 198.100.157.200
After a successful installation, FreeNas show me my IP FailOver adress as :
You may try the following URLs to access the web user interface :
http://0.0.0.0 [em1]
http://198.100.157.200 [em0] (The IP FailOver)
I did :
4) Configured Defaut Route
IPv4: 198.100.157.200 == IP FailOver
IPv6: Empty
5) Configure Static Routes :
Destination Network : 192.99.5.42
Gateway : 192.99.5.254
Description : Empty because it's Optional
6) Configure DNS :
DNS Domain : local
DNS Nameserver 1 : 8.8.8.8
DNS Nameserver 2: EMPTY
DNS Nameserver 3: EMPTY
Did something is wrong on my routes configuration ?
All my best,
Night