IanWor
Dabbler
- Joined
- Dec 7, 2013
- Messages
- 30
Hardware - RocketRaid 27xx - 4 x 3TB WD Caviar Black, 1 x SSD 32G 1 x 32G USB, 16G memory
The SSD was set up as cache.
System was running on 8.3.1 x64 release but I was having problems with the plugin jail. I followed the upgrade process and backed up my config file. I tried to do a GUI upgrade but that failed. I then created a brand new USB with 9.1 Release on it and tried to migrate over.
It pulls the stored config.db file over and reboots.
I then see a message in the list saying: Error 22 Unretryable Error
The .db then upgrades and the system reboots again.
I again see the Error 22 message and the system boots and I can access it over the web GUI.
View Disks shows both the drives: ada0 and da0
When I try an auto import it finds the drive "canies_Venatici" and attempts to import it but fails with the error message:
freenas kernel: Solaris: WARNING: Disk, '/dev/gptid/a6382084-86ff-11e2-945b-94de80070782', has a block alignment that is larger than the pool's alignment
I have also tried to go back to a fresh install of 8.3.1 Release but that does not seem to work either.
Any help would be appreciated!
TIA
Ian
The SSD was set up as cache.
System was running on 8.3.1 x64 release but I was having problems with the plugin jail. I followed the upgrade process and backed up my config file. I tried to do a GUI upgrade but that failed. I then created a brand new USB with 9.1 Release on it and tried to migrate over.
It pulls the stored config.db file over and reboots.
I then see a message in the list saying: Error 22 Unretryable Error
The .db then upgrades and the system reboots again.
I again see the Error 22 message and the system boots and I can access it over the web GUI.
View Disks shows both the drives: ada0 and da0
When I try an auto import it finds the drive "canies_Venatici" and attempts to import it but fails with the error message:
freenas kernel: Solaris: WARNING: Disk, '/dev/gptid/a6382084-86ff-11e2-945b-94de80070782', has a block alignment that is larger than the pool's alignment
I have also tried to go back to a fresh install of 8.3.1 Release but that does not seem to work either.
Any help would be appreciated!
TIA
Ian