phonoflux
Dabbler
- Joined
- Aug 23, 2012
- Messages
- 21
Hi Team
Well my previous (current) NAS breaks pretty much every rule of the 'hardware recommendations' thread along with running at 90% capacity so with much reading and telling myself the credit card can handle it and tomorrow guy can deal with the guilt, I have put together the following list to be acquired rather shortly... pending any feedback so I can get started on the burn in.
It's at http://pricespy.co.nz/list.php?l=144522&view=m but for a text version we have...
1 x ASRock C2750D4I Motherboard (with integrated CPU)
2 x Crucial DDR3 1600 ECC 8gb RAM (from the motherboard's QVL list)
1 x 8 port LSI 9211-8i 2.0 RAID Card in IT mode
1 x 450w CS450M Corsair PSU
8 x WD Red 4TB
1 x Nanoxia Deep Silence DS6 over the top huge case.
1 x Sandisk 16GB USB3 for boot
Didn't opt for a supermicro board as they are priced rather silly here in NZ and availability is just as silly. You'll see the raid card is 600$+ NZD (which is the only store listing the any recommended supermicro boards, not in stock either) which is why I have one coming from Ebay along with the cables recommended in that auction.
View: http://www.ebay.com.au/itm/301248225311
Only other concern I have is the PSU size (various calculators I have played with peg me at 250-350w). Any need for higher? Other than that, I welcome any feedback, thanks in advance!
Well my previous (current) NAS breaks pretty much every rule of the 'hardware recommendations' thread along with running at 90% capacity so with much reading and telling myself the credit card can handle it and tomorrow guy can deal with the guilt, I have put together the following list to be acquired rather shortly... pending any feedback so I can get started on the burn in.
It's at http://pricespy.co.nz/list.php?l=144522&view=m but for a text version we have...
1 x ASRock C2750D4I Motherboard (with integrated CPU)
2 x Crucial DDR3 1600 ECC 8gb RAM (from the motherboard's QVL list)
1 x 8 port LSI 9211-8i 2.0 RAID Card in IT mode
1 x 450w CS450M Corsair PSU
8 x WD Red 4TB
1 x Nanoxia Deep Silence DS6 over the top huge case.
1 x Sandisk 16GB USB3 for boot
Didn't opt for a supermicro board as they are priced rather silly here in NZ and availability is just as silly. You'll see the raid card is 600$+ NZD (which is the only store listing the any recommended supermicro boards, not in stock either) which is why I have one coming from Ebay along with the cables recommended in that auction.
View: http://www.ebay.com.au/itm/301248225311
Only other concern I have is the PSU size (various calculators I have played with peg me at 250-350w). Any need for higher? Other than that, I welcome any feedback, thanks in advance!