Irregular corrupt LAN Interface in FreeNAS 9.3

[MaxManus]

Through several years and upgrades have my NAS still irregular got "corrupted" Interface, which means that I can not log me on using the browser. All services such. SMB and ownCloud continues as normal. The solution has been to enter via Supermicro IPMI View and launch the console from there. Then I deleted the LAN Interface and then it has again been possible to log on normally.

What could be causing the problem and there is a solution?

If I log on my pfSense router via SSL (Putty), I get a menu similar to the one VGA display. If I likewise, log on FreeNAS is window blank.

Is there opportunity to bring up a menu as VGA screen displays?
Is there a command I can use as both remove and possibly create LAN Interface again via SSL?

Thanks for any help,

Stein

 

[SweetAndLow]

What are your hardware specs?

 

[joeschmuck]

What are your hardware specs?

I think it's in the signature.

But I don't see which version of FreeNAS is being run.

 

[MaxManus]

What are your hardware specs?

? As in my signature :)

 

[SweetAndLow]

When using Mobile you don't get to see signatures. :(

 

[dlavigne]

What error do you get when you try to login using the browser? Are you using a lagg? What is the output of ifconfig when you attach using IPMI?

 

[MaxManus]

What error do you get when you try to login using the browser? Are you using a lagg? What is the output of ifconfig when you attach using IPMI?

Browser: This webpage is not available.

I can ping the network card butt not logon to the NAS via browser from my computer .

ifconfig:

Code:

[root@Ginnungagap] ~# ifconfig
igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 15                             00
        options=400b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO>
        ether 00:25:90:d1:93:7c
        inet6 fe80::225:90ff:fed1:937c%igb0 prefixlen 64 scopeid 0x2
        inet 192.168.187.10 netmask 0xffffff00 broadcast 192.168.187.255
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
igb1: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSU                             M,TSO4,TSO6,VLAN_HWTSO>
        ether 00:25:90:d1:93:7d
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect
        status: no carrier
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
        nd6 options=9<PERFORMNUD,IFDISABLED>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 02:d2:c6:3c:81:00
        nd6 options=1<PERFORMNUD>
        id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
        maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
        root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
        member: epair1a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 9 priority 128 path cost 2000
        member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 8 priority 128 path cost 2000
        member: igb0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 2 priority 128 path cost 20000
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu                              1500
        options=8<VLAN_MTU>
        ether 02:e0:7e:00:08:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
epair1a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu                              1500
        options=8<VLAN_MTU>
        ether 02:e0:3a:00:09:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active