sfcredfox
Patron
- Joined
- Aug 26, 2014
- Messages
- 340
Greetings,
After some troubleshooting, research, and trial/error, I still cannot get FreeNAS to recognize the keyboard using IPMI.
I've tried a few things already based on some posts and Google:
https://forums.freenas.org/index.ph...ssues-on-the-supermicro-mbd-x9sbaa-f-o.17912/
http://lists.freebsd.org/pipermail/freebsd-stable/2008-March/041649.html
I've adjusted this both ways, doesn't seem to help.
I've tried adding the tunable:
https://forums.freenas.org/index.php?threads/load-xhci-on-startup.22750/
That threw an error in web gui about unrecoverable error.
When the system boots, it complains about two USB devices it can't recognize. I've looked at BIOS settings, but I don't know what else to try and set. SOL doesn't seems to work either, which may be due to a mis-configuration in BIOS or parameters in GUI?
Fortunately, FreeNAS has a command line interface from the gui, but if I ever have a GUI problem, I'd like to have console access remote.
Anyone else have any ideas?
X8DTN+ / 5520 Dual Zeon 2.27 Ghz Quad / 72GB DDR3 ECC
SIMLP IPMI (1.66 Firmware)
IBM 1015 / LSI 9211-8i / SuperMicro BPN-SAS2-826EL1
No drives/pools yet
After some troubleshooting, research, and trial/error, I still cannot get FreeNAS to recognize the keyboard using IPMI.
I've tried a few things already based on some posts and Google:
https://forums.freenas.org/index.ph...ssues-on-the-supermicro-mbd-x9sbaa-f-o.17912/
http://lists.freebsd.org/pipermail/freebsd-stable/2008-March/041649.html
I've adjusted this both ways, doesn't seem to help.
I've tried adding the tunable:
https://forums.freenas.org/index.php?threads/load-xhci-on-startup.22750/
That threw an error in web gui about unrecoverable error.
When the system boots, it complains about two USB devices it can't recognize. I've looked at BIOS settings, but I don't know what else to try and set. SOL doesn't seems to work either, which may be due to a mis-configuration in BIOS or parameters in GUI?
Fortunately, FreeNAS has a command line interface from the gui, but if I ever have a GUI problem, I'd like to have console access remote.
Anyone else have any ideas?
X8DTN+ / 5520 Dual Zeon 2.27 Ghz Quad / 72GB DDR3 ECC
SIMLP IPMI (1.66 Firmware)
IBM 1015 / LSI 9211-8i / SuperMicro BPN-SAS2-826EL1
No drives/pools yet