What's Happening:
I am trying to back up a Windows machine. After a random amount of time while running rsync, the freenas (and plex jail) disappear from my network. Sometimes the freenas reboots itself randomly, sometimes I am able to access the physical console, sometimes the system becomes completely unresponsive.
Configuration:
FreeNAS-9.3-STABLE-201503070129
2 zpools: freenas-boot, Backups5
Backups5 has 6 datasets: Movies2, Music, Pictures, TV, Videos, jails
Directory created /mnt/Backups5/Remote for mounting external stuff
Plex plugin installed in a jail
Use: Home media storage and backup
What I am doing when the problem occurs:
I run these commands from the console, not the web gui:
mount_smbfs -I home1 //user@home1/Movies /mnt/Backup5/Remote
rsync -av --progress /mnt/Backups5/Remote /mnt/Backups5/Movies2
In the middle of copying, the transfer will just stop. Sometimes the system will reboot, sometimes I will get a network error, sometimes a disk write error, sometimes the system won't respond at all, and I'll have to physically power it off.
The last time the system stopped, I wasn't even copying. I was accessing the Plex server, and it dropped. On the console setup page it showed "No interfaces configured", but ifconfig showed the IP address configured correctly.
What I have:
An official current generation FreeNAS Mini from iXsystems with 6 4TB WD Red drives added in (4 internal, 2 from SATA cables run through the PCI space on the back.
Only 1 network infterface connected @ Gigabit to a TP-Link TL-SG1016D. No LAGG configured.
What I have tried:
I have run short and long smart tests on the hard drives which came out clean.
Scrubs of the data have shown some corruption, but I'm thinking that that might be coming from the Windows side as the disks are old (which is why I'm trying to back them up onto something reliable)
Now what:
I've reached a level of frustrating ignorance, where I don't know how to troubleshoot this. Or more infuriatingly, where I don't know where to start learning on how to troubleshoot this.
I have attached the freenas generated debug information, in hopes that someone can see what I've missed.
Thank you.
I am trying to back up a Windows machine. After a random amount of time while running rsync, the freenas (and plex jail) disappear from my network. Sometimes the freenas reboots itself randomly, sometimes I am able to access the physical console, sometimes the system becomes completely unresponsive.
Configuration:
FreeNAS-9.3-STABLE-201503070129
2 zpools: freenas-boot, Backups5
Backups5 has 6 datasets: Movies2, Music, Pictures, TV, Videos, jails
Directory created /mnt/Backups5/Remote for mounting external stuff
Plex plugin installed in a jail
Use: Home media storage and backup
What I am doing when the problem occurs:
I run these commands from the console, not the web gui:
mount_smbfs -I home1 //user@home1/Movies /mnt/Backup5/Remote
rsync -av --progress /mnt/Backups5/Remote /mnt/Backups5/Movies2
In the middle of copying, the transfer will just stop. Sometimes the system will reboot, sometimes I will get a network error, sometimes a disk write error, sometimes the system won't respond at all, and I'll have to physically power it off.
The last time the system stopped, I wasn't even copying. I was accessing the Plex server, and it dropped. On the console setup page it showed "No interfaces configured", but ifconfig showed the IP address configured correctly.
What I have:
An official current generation FreeNAS Mini from iXsystems with 6 4TB WD Red drives added in (4 internal, 2 from SATA cables run through the PCI space on the back.
Only 1 network infterface connected @ Gigabit to a TP-Link TL-SG1016D. No LAGG configured.
What I have tried:
I have run short and long smart tests on the hard drives which came out clean.
Scrubs of the data have shown some corruption, but I'm thinking that that might be coming from the Windows side as the disks are old (which is why I'm trying to back them up onto something reliable)
Now what:
I've reached a level of frustrating ignorance, where I don't know how to troubleshoot this. Or more infuriatingly, where I don't know where to start learning on how to troubleshoot this.
I have attached the freenas generated debug information, in hopes that someone can see what I've missed.
Thank you.