drinking12many
Contributor
- Joined
- Apr 8, 2012
- Messages
- 148
So i am on 11.3RC1. I bought 3 Solarflare 10Gb NICs off Ebay for $17 each. Put two in my ESXI hosts installed the VIB file rebooted showed up no problems everything is great.
Put the one in the FreeNAS box, doesn't see it. So I figure well maybe there is no driver or something I looked before I ordered it and it appeared supported, but it appeared to be true. It should be using the sfxge.ko driver on 11.3 RC1 https://www.freebsd.org/cgi/man.cgi?query=sfxge&sektion=4
The sfxge.ko was not there in either /boot/kernel or /boot/modules easy enough (i thought) downloaded the Freebsd 11.3 ISO grabbed the driver out of it (it was there) and put it in /boot/kernel which is where it was on the freebsd iso. Rebooted, if I do a kldstat I do not see it listed. If I do a kldload /boot/kernel/sfxge.ko it says its already loaded. I tried adding a line to the loader.conf as well rebooted same results. Doing a pciconf -lv I don't see it. I moved it to a different x8 slot. Still,dont see it. It's possible I suppose that its bad, but I won't know that until I put it into another box here in a bit and make sure it sees it. Provided it does see it and I think it will I have to think its either not truly supported or I didn't do something that's needed to add the driver.
My main question really is that I have never had to install a driver into FreeBSD/FreeNAS before is there something else I need to do to ensure it truly loaded?
Everything I can find says it should be supported in Freebsd with the sfxge driver. Both of the other ones do work in ESX and show up in there as Solarflare SFC9020 cards.
Thanks for any help its truly possible I just missed a step. Ill rule out it being bad hopefully here in a bit in another box.
EDIT: I saw another forum member say on 11.3 master with the same card he didn't have to do anything special. I'll rule out its bad next it always could be.
Put the one in the FreeNAS box, doesn't see it. So I figure well maybe there is no driver or something I looked before I ordered it and it appeared supported, but it appeared to be true. It should be using the sfxge.ko driver on 11.3 RC1 https://www.freebsd.org/cgi/man.cgi?query=sfxge&sektion=4
The sfxge.ko was not there in either /boot/kernel or /boot/modules easy enough (i thought) downloaded the Freebsd 11.3 ISO grabbed the driver out of it (it was there) and put it in /boot/kernel which is where it was on the freebsd iso. Rebooted, if I do a kldstat I do not see it listed. If I do a kldload /boot/kernel/sfxge.ko it says its already loaded. I tried adding a line to the loader.conf as well rebooted same results. Doing a pciconf -lv I don't see it. I moved it to a different x8 slot. Still,dont see it. It's possible I suppose that its bad, but I won't know that until I put it into another box here in a bit and make sure it sees it. Provided it does see it and I think it will I have to think its either not truly supported or I didn't do something that's needed to add the driver.
My main question really is that I have never had to install a driver into FreeBSD/FreeNAS before is there something else I need to do to ensure it truly loaded?
Everything I can find says it should be supported in Freebsd with the sfxge driver. Both of the other ones do work in ESX and show up in there as Solarflare SFC9020 cards.
Thanks for any help its truly possible I just missed a step. Ill rule out it being bad hopefully here in a bit in another box.
EDIT: I saw another forum member say on 11.3 master with the same card he didn't have to do anything special. I'll rule out its bad next it always could be.
Last edited: