filipjson
Cadet
- Joined
- Aug 7, 2017
- Messages
- 3
Hi,
The time has finally come for me to do my first FreeNAS build. Something I have longed to do for a long time.
The NAS will be a home server taking care of a few files. But it will also be running Plex (will max out at two full-HD streams at once if even that), Sonarr, Radarr/CouchPotato, NZBGet/SABnzbd and Home Assistant.
I don't have a super tight budget but I have tried to keep the costs down where I can. But after doing my home work I have decided that building without ECC support is out of the question. All suggestions on how I could cut the costs or change out some part for something better around the same price point is more than welcome.
Here are the parts I have picked so far:
Motherboard: Intel S1200SPS (https://www.amazon.com/Intel-DBS1200SPS-Server-Board-S1200sps/dp/B017E0LR32)
Processor: Intel Pentium 3.5 GHz 1151 (https://www.amazon.com/Intel-Pentium-Dual-Core-Processor-BX80677G4560/dp/B01NCE8T92)
RAM: Crucial 16GB Single 2133 DDR4 ECC (https://www.amazon.com/Crucial-Single-PC4-17000-CT16G4WFD8213-MTA18ASF2G72AZ-2G1A1/dp/B017UGK94S)
Power: Xilence Performance C 500 (Seems to only be available locally)
HDDs: WD Red 3 TB x 2 (https://www.amazon.com/Red-3TB-Hard-Disk-Drive/dp/B008JJLW4M)
Boot: SanDisk Ultra Fit 16GB USB 3.0 (https://www.amazon.com/SanDisk-Ultra-Flash-Drive-SDCZ43-016G-G46/dp/B00LLEN5FQ)
Case: Fractal Design Core 1500 (https://www.amazon.com/Fractal-Micro-Cooling-Cases-FD-CA-CORE-1500-BL/dp/B00O65I9QC/)
Best,
Filip
The time has finally come for me to do my first FreeNAS build. Something I have longed to do for a long time.
The NAS will be a home server taking care of a few files. But it will also be running Plex (will max out at two full-HD streams at once if even that), Sonarr, Radarr/CouchPotato, NZBGet/SABnzbd and Home Assistant.
I don't have a super tight budget but I have tried to keep the costs down where I can. But after doing my home work I have decided that building without ECC support is out of the question. All suggestions on how I could cut the costs or change out some part for something better around the same price point is more than welcome.
Here are the parts I have picked so far:
Motherboard: Intel S1200SPS (https://www.amazon.com/Intel-DBS1200SPS-Server-Board-S1200sps/dp/B017E0LR32)
Processor: Intel Pentium 3.5 GHz 1151 (https://www.amazon.com/Intel-Pentium-Dual-Core-Processor-BX80677G4560/dp/B01NCE8T92)
RAM: Crucial 16GB Single 2133 DDR4 ECC (https://www.amazon.com/Crucial-Single-PC4-17000-CT16G4WFD8213-MTA18ASF2G72AZ-2G1A1/dp/B017UGK94S)
Power: Xilence Performance C 500 (Seems to only be available locally)
HDDs: WD Red 3 TB x 2 (https://www.amazon.com/Red-3TB-Hard-Disk-Drive/dp/B008JJLW4M)
Boot: SanDisk Ultra Fit 16GB USB 3.0 (https://www.amazon.com/SanDisk-Ultra-Flash-Drive-SDCZ43-016G-G46/dp/B00LLEN5FQ)
Case: Fractal Design Core 1500 (https://www.amazon.com/Fractal-Micro-Cooling-Cases-FD-CA-CORE-1500-BL/dp/B00O65I9QC/)
Best,
Filip