Albert Yang
Dabbler
- Joined
- Dec 23, 2013
- Messages
- 21
I'd used FreeNAS from 9.0 to now, 9.2.1.6. The CIFS was good until I upgraded to 9.2.1.7 last month.
After I upgraded the system to 9.2.1.7, I copied some files to FreeNAS, some files were copied, others failed.
And I found 9.2.1.8 was released, I upgraded system to 9.2.1.8. The upgrade was success, but CIFS could not start.
I tried restore factory default or re-install FreeNAS. But the CIFS service of both 9.2.1.7 and 9.2.1.8 could not start anymore. Here is the report:
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: /sbin/sysctl -n 'kern.maxfilesperproc'
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: zfs list -H -o mountpoint,name
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: zfs list -H -o mountpoint
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: zfs list -H -o mountpoint
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: /usr/local/bin/pdbedit -d 0 -i smbpasswd:/tmp/tmp5pMoV9 -s /usr/local/etc/smb4.conf -e tdbsam:/var/etc/private/passdb.tdb
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: /usr/local/bin/net groupmap list
Sep 30 07:40:21 freenas notifier: winbindd not running? (check /var/run/samba/winbindd.pid).
Sep 30 07:40:21 freenas notifier: smbd not running? (check /var/run/samba/smbd.pid).
Sep 30 07:40:21 freenas notifier: nmbd not running? (check /var/run/samba/nmbd.pid).
Sep 30 07:40:21 freenas notifier: Performing sanity check on Samba configuration: FAILED
I tried 9.2.1.5, the CIFS could start now. But I still could not visit FreeNAS from my Windows cilent. The Windows reported:
The device did not set to accept SMB connection.
I don't familiar to Unix/BSD system. I looked up the guide book and try but the problem exist. Could anyone help me?
After I upgraded the system to 9.2.1.7, I copied some files to FreeNAS, some files were copied, others failed.
And I found 9.2.1.8 was released, I upgraded system to 9.2.1.8. The upgrade was success, but CIFS could not start.
I tried restore factory default or re-install FreeNAS. But the CIFS service of both 9.2.1.7 and 9.2.1.8 could not start anymore. Here is the report:
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: /sbin/sysctl -n 'kern.maxfilesperproc'
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: zfs list -H -o mountpoint,name
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: zfs list -H -o mountpoint
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: zfs list -H -o mountpoint
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: /usr/local/bin/pdbedit -d 0 -i smbpasswd:/tmp/tmp5pMoV9 -s /usr/local/etc/smb4.conf -e tdbsam:/var/etc/private/passdb.tdb
Sep 30 07:40:21 freenas generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: /usr/local/bin/net groupmap list
Sep 30 07:40:21 freenas notifier: winbindd not running? (check /var/run/samba/winbindd.pid).
Sep 30 07:40:21 freenas notifier: smbd not running? (check /var/run/samba/smbd.pid).
Sep 30 07:40:21 freenas notifier: nmbd not running? (check /var/run/samba/nmbd.pid).
Sep 30 07:40:21 freenas notifier: Performing sanity check on Samba configuration: FAILED
I tried 9.2.1.5, the CIFS could start now. But I still could not visit FreeNAS from my Windows cilent. The Windows reported:
The device did not set to accept SMB connection.
I don't familiar to Unix/BSD system. I looked up the guide book and try but the problem exist. Could anyone help me?