Au_Squirrel
Cadet
- Joined
- Nov 19, 2011
- Messages
- 9
I recently bought a HP Proliant Micro Server and have been trying to install FreeNas on it without success. I am first checking the hardware compatability of the system before looking at any installation issues.
The specs of the server are:
Processor Dual Core 1.3 GHz AMD Athlon II (Neo N36L) with 2 MB cache
Memory 2 Gb PC3-10600E DDR3, operating at maximum of 800 MHz -
Embedded SATA controller RAID 0/1
Software Version 8.0.2 amd
4G USB drive installed on MB expansion slot
Now reading the forums, over members have reported successfully installing FreeNas. Did you use the USD stick installation process? Did you have to do anything different from the normal installation process?
I have used that and the system is just cycling on boot up. The boot menu gives me the F1 FreeBSD, F2 FreeBSD, F5 Drive 1 menu, auto selects F1 and reboots.
Thanks
Au_squirrel
The specs of the server are:
Processor Dual Core 1.3 GHz AMD Athlon II (Neo N36L) with 2 MB cache
Memory 2 Gb PC3-10600E DDR3, operating at maximum of 800 MHz -
Embedded SATA controller RAID 0/1
Software Version 8.0.2 amd
4G USB drive installed on MB expansion slot
Now reading the forums, over members have reported successfully installing FreeNas. Did you use the USD stick installation process? Did you have to do anything different from the normal installation process?
I have used that and the system is just cycling on boot up. The boot menu gives me the F1 FreeBSD, F2 FreeBSD, F5 Drive 1 menu, auto selects F1 and reboots.
Thanks
Au_squirrel