Cupcake
Dabbler
- Joined
- Jan 1, 2014
- Messages
- 42
Hi guys
I have been running Freenas on this server for a couple of years now. The box is
The only out of the ordinary thing I see is "CRITICAL: June 2, 2019, 1:08 p.m. - Device: /dev/ada1, 19 Currently unreadable (pending) sectors" in the web interface. Haven't had time to look into this yet, but I would expect the system to still run fine even with problems on a single drive. I did have to replace and resilver a drive before and even then I could still use the NAS better than now.
Any ideas what I should look into?
EDIT: This is my system
Mainboard: Asus M5A78LM/USB-3
CPU: AMD Athlon II X2 270
RAM: Kingston 16GB (Kit 2x8GB) DDR3-1333 ECC CL9 w/TS
Drives: 6x WD 4TB red
I have been running Freenas on this server for a couple of years now. The box is
- 6x4TB in ZFS2 config
- 16 GB RAM
- Pool is 72% full
- I run scrubs and SMART checks frequently
- Originally I had transfer rates of ~ 80 mb/s
- Transfer rates now are ~ 50 kb/s
- web interface is still responsive as always
- Listing the directories in the pool takes forever. That's regardless of whether I access it via a windows network map or directly via SSH and run ls
The only out of the ordinary thing I see is "CRITICAL: June 2, 2019, 1:08 p.m. - Device: /dev/ada1, 19 Currently unreadable (pending) sectors" in the web interface. Haven't had time to look into this yet, but I would expect the system to still run fine even with problems on a single drive. I did have to replace and resilver a drive before and even then I could still use the NAS better than now.
Any ideas what I should look into?
EDIT: This is my system
Mainboard: Asus M5A78LM/USB-3
CPU: AMD Athlon II X2 270
RAM: Kingston 16GB (Kit 2x8GB) DDR3-1333 ECC CL9 w/TS
Drives: 6x WD 4TB red
Last edited: