thisisnotdave
Cadet
- Joined
- Oct 28, 2012
- Messages
- 3
I had a drive report SMART errors and replaced it. After resilvering my array still shows as degraded. I have raidz+2 config consisting of 6 drives. After the re-silvering completed I rebooted and it started the process again. I think I might have another bad drive. Is it safe to replace after this resilvering process completes?
Here is my zpool status.
http://pastebin.com/CVJ9Ntqb
Here are my drive SMARTCTL reports. /dev/ada4 seems hosed up but that drive isn't in the Zpool.
http://pastebin.com/AzQ7bpqE
How should I proceed to ensure I don't lose my data?
Here is my zpool status.
http://pastebin.com/CVJ9Ntqb
Here are my drive SMARTCTL reports. /dev/ada4 seems hosed up but that drive isn't in the Zpool.
http://pastebin.com/AzQ7bpqE
How should I proceed to ensure I don't lose my data?