redmessengerbag
Cadet
- Joined
- Oct 10, 2013
- Messages
- 3
I have a ZFS RaidZ2 array with 7 drives. I was migrating the drives to different hardware. As I was migrating, I finally figure out how to setup email alerts properly, after this system had been running for a year. Now with the email alerts setup I learn that 2 drives have uncorrectable sectors.
Device: /dev/ada1, 4513 Offline uncorrectable sectors Seagate ST2000DM001
Device: /dev/ada3, 160 Offline uncorrectable sectors Seagate ST2000DL003
is it just me or is that 4513 sectors seems high enough that the array should be giving array health alerts (it's normally green)?
I am trying to decide on next steps. Fortunately the DL003 drive is still under warranty for another week or so I was able to RMA it after running a long test with Seatools.
The other drive, ST2000DM001 is out of warranty. My question is what should I with this drive?
I pulled the drive to run sea tools in another computer, fails. Crystaldisk shows about 1155 pending sectors, and I am running the Fix All Long with Sea tools. If this is repaired and all of the sectors are successfully reallocated, should I still not use this drive in the array?
Also, if it does repair, would I run into any issue reinserting it into the array, I didn't do anything (detach or replace) in FreeNAS, I just shut it down and pulled the drives. Any help greatly appreciated.
The good thing is any meaningful data on this array is already backed up onto a separate external hard drive.
Device: /dev/ada1, 4513 Offline uncorrectable sectors Seagate ST2000DM001
Device: /dev/ada3, 160 Offline uncorrectable sectors Seagate ST2000DL003
is it just me or is that 4513 sectors seems high enough that the array should be giving array health alerts (it's normally green)?
I am trying to decide on next steps. Fortunately the DL003 drive is still under warranty for another week or so I was able to RMA it after running a long test with Seatools.
The other drive, ST2000DM001 is out of warranty. My question is what should I with this drive?
I pulled the drive to run sea tools in another computer, fails. Crystaldisk shows about 1155 pending sectors, and I am running the Fix All Long with Sea tools. If this is repaired and all of the sectors are successfully reallocated, should I still not use this drive in the array?
Also, if it does repair, would I run into any issue reinserting it into the array, I didn't do anything (detach or replace) in FreeNAS, I just shut it down and pulled the drives. Any help greatly appreciated.
The good thing is any meaningful data on this array is already backed up onto a separate external hard drive.