gmanpsu
Cadet
- Joined
- Sep 24, 2012
- Messages
- 6
Hey folks, new to FreeNAS and this whole community, so I apologize for my ignorance if this is something that should be easy and intuitive for most users. I have spent several evenings over the past few days searching and to no avail, have came to the same thing at the end of the night with no solution. This all occurred after a power outage, and a reboot. I would like to recover the data on this drive if at all possible!!!
The panic itself
I receive the same panic message when trying to import the zpool in FreeNAS 8.0.1, as well as FreeBSD, and PC-BDS9.0.
I've read around on a lot of forums and have no found a whole lot, I've tried using zpool import -f storage, zpool imort -fFX storage and zpool import -fF storage also result in the same panic. When trying any other command I get the message cannot open 'storage': no such pool, but yet when I use zpool import, it shows the pool as being online with no errors.
Further information, I have 6 2TB hard drives running hardware RAID 5 (have discovered this isn't the best setup for using ZFS in my research), and the RAID controller shows all drives are fine and healthy.
So I'm at a loss!! As stated above I'm novice in this realm of computing, so any ideas and direction are greatly appreciated!!! :D
The panic itself
Code:
panic: solaris assert: 0 == dmu_buf_hold_array(os, object, offset, size, FALSE, FTAG, &numbufs, &dbp), file: /builds/i386/pcbsd-build90/fbsd-source/9.0/sys/modules/zfs/../../cddl/contrib/opensolaris/uts/common/fs/zfs/dmu.c line:779 cpuid = 1 Uptime : ***x
I receive the same panic message when trying to import the zpool in FreeNAS 8.0.1, as well as FreeBSD, and PC-BDS9.0.
I've read around on a lot of forums and have no found a whole lot, I've tried using zpool import -f storage, zpool imort -fFX storage and zpool import -fF storage also result in the same panic. When trying any other command I get the message cannot open 'storage': no such pool, but yet when I use zpool import, it shows the pool as being online with no errors.
Further information, I have 6 2TB hard drives running hardware RAID 5 (have discovered this isn't the best setup for using ZFS in my research), and the RAID controller shows all drives are fine and healthy.
So I'm at a loss!! As stated above I'm novice in this realm of computing, so any ideas and direction are greatly appreciated!!! :D