I apologize in advance if this is a redundant question, but I have been unable to find a definitive answer after researching for days now.
Unable to install windows 7 or 10 64-bit in FreeNAS VM, hangs when GUI for windows installer attempts to load.
Confirmed that the hardware should be supported based on the results of the following shell command...
[root@freenas ~]# grep POPCNT /var/run/dmesg.boot
Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
Not a lot of customization in the VM configuration but I've created a zvol of 100gb and mounted in in the VM, allocated 2 CPUs and 4096mb memory.
Any tips or advice would be greatly appreciated.
FreeNAS-11.0-U4
AMD A4-5000
16gb RAM
Unable to install windows 7 or 10 64-bit in FreeNAS VM, hangs when GUI for windows installer attempts to load.
Confirmed that the hardware should be supported based on the results of the following shell command...
[root@freenas ~]# grep POPCNT /var/run/dmesg.boot
Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
Not a lot of customization in the VM configuration but I've created a zvol of 100gb and mounted in in the VM, allocated 2 CPUs and 4096mb memory.
Any tips or advice would be greatly appreciated.
FreeNAS-11.0-U4
AMD A4-5000
16gb RAM
Last edited: