I had a Supermicro X10SLL-F-O mother board go bad and so I replaced it with a new X10SL7-F board (I wanted to increase RAM to 32 GB). Anyway that is the only system change I have made but I noticed my SMART Status reports are not providing info anymore.
Prior to this the reports would like similar to the following:
Now however I receive the following report:
My assumption is that this must have something to do with the new motherboard (since that is what changed). System specifications are below:
FreeNAS-11.1-U7
Intel Xeon E3-1230v2 3.3GHz
Supermicro X10SL7-F
16 GB DDR3 ECC 1600 RAM
(2) SanDisk 16 GB Flash Drives
4 WD Red WD63EFRX NAS
HD 2 WD Red WD6002FFWX NAS Hard Drives
(RAIDZ2, 10.5 TB usable space)
Prior to this the reports would like similar to the following:
Code:
########## SMART status report summary for all drives ########## +------+---------------+----+-----+-----+-----+-------+-------+--------+------+----------+------+-------+ |Device|Serial |Temp|Power|Start|Spin |ReAlloc|Current|Offline |Seek |Total |High |Command| | | | |On |Stop |Retry|Sectors|Pending|Uncorrec|Errors|Seeks |Fly |Timeout| | | | |Hours|Count|Count| |Sectors|Sectors | | |Writes|Count | +------+---------------+----+-----+-----+-----+-------+-------+--------+------+----------+------+-------+ |ada0 !|K1K9PXWD | 46 |13760| 17| 0| 0| 0| 0| N/A| N/A| N/A| N/A| |ada1 ?|K1KAPE0D | 45 |13761| 17| 0| 0| 0| 0| N/A| N/A| N/A| N/A| |ada2 |WD-WCC4N7CNYLCT| 36 |17142| 25| 0| 0| 0| 0| N/A| N/A| N/A| N/A| |ada3 |WD-WCC4NEAUV8ND| 36 |37034| 62| 0| 0| 0| 0| N/A| N/A| N/A| N/A| |ada4 |WD-WMC4N0F3APUY| 37 |37034| 62| 0| 0| 0| 0| N/A| N/A| N/A| N/A| |ada5 |WD-WMC4N0F95M77| 36 |37034| 63| 0| 0| 0| 0| N/A| N/A| N/A| N/A| +------+---------------+----+-----+-----+-----+-------+-------+--------+------+----------+------+-------+ ########## SMART status report for ada0 drive (Western Digital Red: K1K9PXWD) ########## smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build) SMART overall-health self-assessment test result: PASSED ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 104 3 Spin_Up_Time 0x0007 208 208 024 Pre-fail Always - 337 (Average 297) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 17 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18 9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 13760 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 17 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 572 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 572 194 Temperature_Celsius 0x0002 130 130 000 Old_age Always - 46 (Min/Max 19/51) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 No Errors Logged
Now however I receive the following report:
Code:
########## SMART status report summary for all drives ########## +------+---------------+----+-----+-----+-----+-------+-------+--------+------+----------+------+-------+ |Device|Serial |Temp|Power|Start|Spin |ReAlloc|Current|Offline |Seek |Total |High |Command| | | | |On |Stop |Retry|Sectors|Pending|Uncorrec|Errors|Seeks |Fly |Timeout| | | | |Hours|Count|Count| |Sectors|Sectors | | |Writes|Count | +------+---------------+----+-----+-----+-----+-------+-------+--------+------+----------+------+-------+ |ada0 | | | | | | | | | N/A| N/A| N/A| N/A| |ada1 | | | | | | | | | N/A| N/A| N/A| N/A| |ada2 | | | | | | | | | N/A| N/A| N/A| N/A| |ada3 | | | | | | | | | N/A| N/A| N/A| N/A| |ada4 | | | | | | | | | N/A| N/A| N/A| N/A| |ada5 | | | | | | | | | N/A| N/A| N/A| N/A| +------+---------------+----+-----+-----+-----+-------+-------+--------+------+----------+------+-------+ ########## SMART status report for ada0 drive :) ) ########## smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build) /dev/ada0: Unable to detect device type Please specify device type with the -d option. Use smartctl -h to get a usage summary
My assumption is that this must have something to do with the new motherboard (since that is what changed). System specifications are below:
FreeNAS-11.1-U7
Intel Xeon E3-1230v2 3.3GHz
Supermicro X10SL7-F
16 GB DDR3 ECC 1600 RAM
(2) SanDisk 16 GB Flash Drives
4 WD Red WD63EFRX NAS
HD 2 WD Red WD6002FFWX NAS Hard Drives
(RAIDZ2, 10.5 TB usable space)
Last edited: