I replied to your PM, its the end of the year and a lot of us a busy. There's also an 8 hour time difference between the west coast and France.
I know, that's why I did cry so much.... I'm not linving in France, but in the Feench Indies :)
----------------------
Here we are, I followed your advices.
did a relisvering today. It seems it went fine :
Code:
[root@freenas] ~# zpool status -v
pool: gra1
state: ONLINE
scrub: resilver completed after 8h36m with 0 errors on Tue Jan 1 21:48:13 2013
config:
NAME STATE READ WRITE CKSUM
gra1 ONLINE 0 0 0
raidz1 ONLINE 0 0 0
gptid/f53806cb-fab1-11e1-89d0-14dae98ee84a ONLINE 0 0 0
gptid/59d2f087-5436-11e2-aa3a-14dae98ee84a ONLINE 0 0 0 926G resilvered
gptid/19f779b3-e63a-11e0-9acd-14dae98ee84a ONLINE 0 0 0
ada3p2 ONLINE 0 0 0
errors: No known data errors
8h36 is a bit much (I did one, a year ago and it did go faster), so I check the speed through sftp : still 2 or 3 MB/S
Here are my bench bench bench,
still low, even lower than before in writing :( :
Code:
[root@freenas] ~# cd /mnt/gra1/
[root@freenas] /mnt/gra1# dd if=/dev/zero of=tmp.dat bs=2048k count=50k
51200+0 records in
51200+0 records out
107374182400 bytes transferred in 1382.607997 secs (77660611 bytes/sec)
But hurra : get better in reading :)
Code:
[root@freenas] /mnt/gra1# dd if=tmp.dat of=/dev/null bs=2048k count=50k
51200+0 records in
51200+0 records out
107374182400 bytes transferred in 580.309952 secs (185029021 bytes/sec)
I'm going to make a scrub during the night (hope it's ok), what should I do next ? : still have the left column away in my GUI, can connect to samba, etc... Is there maybe a clean way to begins with a clean system, maintining my data (factory restore ? upgrading to 8.3 ?)
thanks again and beaucoup for the time you already spent on my pb :)