I very recently setup a FreeNAS box and am running into an error with SMART temperature email notifications. I'm on FreeNAS-9.3-STABLE-201509282017 and, in /var/log/messages, I'm seeing:
I'm triggering notifications with these SMART temperature settings:
I've also tried setting the above parameters to "3, Never, 0, 20, 25, foo@gmail.com"; "30, Never, 0, 40, 50, foo@gmail.com".
When temps pass the critical threshold, an alert is triggered in the web GUI and logged to /var/log/messages. The "Failed to send email" error does not consistently appear after each polling---I'm not sure why but I don't receive emails either way. Leaving the email field blank also generates the error.
I'm pretty sure my email is setup correctly as "Send Test Mail" works, both the mail and sendmail commands work, and I get UPS and security notification emails. My email settings:
I've set both the root and my own user's emails to foo@gmail.com.
I've also tried rebooting and powering down, to no avail. If it matters, my hardware is an Asrock C2550D4I, 4x8gb Kingston ECC ram, 8x4TB HGST NAS. Any ideas?
freenas alert.py: [common.system:210] Failed to send email: [Errno 1] _ssl.c:510: error:140943FC:SSL routines:SSL3_READ_BYTES:sslv3 alert bad record mac
I'm triggering notifications with these SMART temperature settings:
Check interval: 3
Power mode: Idle
Difference: 2
Informational: 20
Critical: 25
Email to report: foo@gmail.com (where "foo" is my actual email)
Power mode: Idle
Difference: 2
Informational: 20
Critical: 25
Email to report: foo@gmail.com (where "foo" is my actual email)
I've also tried setting the above parameters to "3, Never, 0, 20, 25, foo@gmail.com"; "30, Never, 0, 40, 50, foo@gmail.com".
When temps pass the critical threshold, an alert is triggered in the web GUI and logged to /var/log/messages. The "Failed to send email" error does not consistently appear after each polling---I'm not sure why but I don't receive emails either way. Leaving the email field blank also generates the error.
I'm pretty sure my email is setup correctly as "Send Test Mail" works, both the mail and sendmail commands work, and I get UPS and security notification emails. My email settings:
From email: foo@gmail.com
Outgoing mail server: smtp.google.com
Port to connect to: 465
TLS/SSL: SSL
Use SMTP Authentication: true
Username: foo@gmail.com
Password: app password (as I'm using 2 factor auth)
Outgoing mail server: smtp.google.com
Port to connect to: 465
TLS/SSL: SSL
Use SMTP Authentication: true
Username: foo@gmail.com
Password: app password (as I'm using 2 factor auth)
I've set both the root and my own user's emails to foo@gmail.com.
I've also tried rebooting and powering down, to no avail. If it matters, my hardware is an Asrock C2550D4I, 4x8gb Kingston ECC ram, 8x4TB HGST NAS. Any ideas?