Reports broken after upgrade from 8.03 32 bit to 64 bit

[kryptoman]

Hi,
after upgrading to 64 bit the reporting tab no longer works - I just get a blank page.
I have upgraded my old 32 bit pentium system to a new xeon system, keeping my 4 drive raidz zfs volume.
Apart from reporting, everything else seems to be working fine. the steps I followed:
(1) Saved config from old 32 bit system (FreeNAS 8.03)
(2) Performed an export on old system
(3) upgraded motherboard
(4) booted new system with old 32 bit FreeNAS USB
(5) Performed an auto import of the old volume and uploaded previously saved config
(6) Checked everything working in 32 bit mode on new hardware
(7) Performed export again
(8) Performed firmware update using the 64 bit update file
(9) Auto import of volume again
(10) uploaded saved config again
(11) Checked everything working again and found all ok except reporting is broken

I am not sure if there is a simple manual fix I can do to get this going again, or if I have done something wrong, or perhaps there is a configuration incompatibility between the 32 bit and 64 bit versions?

 

[William Grzybowski]

Graphics are architecture dependent, remove files in /var/db/collectd, /data/rrd_dir.tar.bz2 and restart collectd

 

[kryptoman]

That fixed it, thanks!