Hi, I'm trying to setup Freenas 9.1 on the KBN-i 5200 board and the ethernet chip is not working. This is the relevant output from dmesg:
ifconfig shows only lo0 and ipfw0 as interfaces. Is there any way to get the chip to work?
Edit: The specs say that it is a "RTL8111E Gigabit Fast Ethernet Controller".
Code:
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe900000-0xfe900fff,0xd0800000-0xd0803fff irq 32 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 re0: Unknown H/W revision: 0x4c000000 device_attach: re0 attach returned 6 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe900000-0xfe900fff,0xd0800000-0xd0803fff irq 32 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 re0: Unknown H/W revision: 0x4c000000 device_attach: re0 attach returned 6
ifconfig shows only lo0 and ipfw0 as interfaces. Is there any way to get the chip to work?
Edit: The specs say that it is a "RTL8111E Gigabit Fast Ethernet Controller".