RAID 5 lost a drive, second is flapping

[TechGuy44]

I'm helping a friend running 0.69b2 with his NAS. Someone else set it up for him, so they don't know much about the GUI, and I'm not familiar with it, either.

One drive failed, drive ad4. We replaced that. Another drive, ad6, keeps popping up with errors and stopping the rebuild process. If I restart the NAS, the rebuilding on ad4 restarts. Is there a way I can remount ad6 and resume the rebuilding process on ad4?

Output:
Status: Total=4, Online=3
Type: AUTOMATIC
Pending: (wqp 0 // 0)
Stripesize: 131072
MemUse: 0 (msl 0)
Newest: 0
ID: 498846119
Providers:
1. Name: raid5/Datastore
Mediasize: 3000614387712 (2.7T)
Sectorsize: 512
Mode: r1w1e2
Consumers:
1. Name: ad7
Mediasize: 1000204886016 (932G)
Sectorsize: 512
Mode: r2w2e3
DiskNo: 3
Error: No
2. Name: ad6
Mediasize: 1000204886016 (932G)
Sectorsize: 512
Mode: r2w2e3
DiskNo: 2
Error: Yes
3. Name: ad5
Mediasize: 1000204886016 (932G)
Sectorsize: 512
Mode: r2w2e3
DiskNo: 1
Error: No
4. Name: ad4
Mediasize: 1000204886016 (932G)
Sectorsize: 512
Mode: r2w2e3
Synchronized: 140280856576 / 14% (p:1600)
DiskNo: 0
Error: No

 

[pirateghost]

You should ask your question in the appropriate forums. This FreeNAS has nothing to do with the version you are running. Please read the forum rules

Sent from my Nexus 7