Hi,
new user reporting with something that's been bugging me. Hardware is:
HPE Microserver GEN10 Entry with AMD Opteron X3216, 8Gb RAM, 4 x WD RED 1 Tb + WD Greed 120Gb SSD on SATA5 port
Installing FreeNAS 11.2-U7 was a bit of a problem, but I figured it out (By using hw.pci.realloc_bars=1 on boot). Once I got it running I've been having constant freezing on the Web GUI with message:
It does it every minute or so and configuring NAS is really hard due that. Any ideas how to solve this? I set Autotune and it made some variables, but those didn't help.
new user reporting with something that's been bugging me. Hardware is:
HPE Microserver GEN10 Entry with AMD Opteron X3216, 8Gb RAM, 4 x WD RED 1 Tb + WD Greed 120Gb SSD on SATA5 port
Installing FreeNAS 11.2-U7 was a bit of a problem, but I figured it out (By using hw.pci.realloc_bars=1 on boot). Once I got it running I've been having constant freezing on the Web GUI with message:
Code:
Connecting to NAS... Make sure the NAS system is powered on and connected to the network.
It does it every minute or so and configuring NAS is really hard due that. Any ideas how to solve this? I set Autotune and it made some variables, but those didn't help.