pechkin000
Explorer
- Joined
- Jan 24, 2014
- Messages
- 59
Every time I reboot, I get the following error:
CRITICAL
Device: /dev/da1 [SAT], 1 Offline uncorrectable sector
However my zpool status output looks error free and if I dismiss this error it doesn't come up again. In UI everything looks error free.
When I run
Here is the full output of the
Thank you in advance for any help with this.
My system specs just in case:
OS Version:
FreeNAS-11.3-MASTER-201903060936
(Build Date: Mar 6, 2019 5:51)
Processor:
Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz (8 cores)
Memory:
16 GiB
s
Wed, 06 Mar 2019 18:44:04 GMT
CRITICAL
Device: /dev/da1 [SAT], 1 Offline uncorrectable sector
However my zpool status output looks error free and if I dismiss this error it doesn't come up again. In UI everything looks error free.
When I run
smartctl -x /dev/da1
I dont see anything obvious. I am wondering if this is something I need to worry about immediately? This only comes up on reboot, otherwise disk functions perfectly fine.Here is the full output of the
smartctl -x /dev/da1d
, I am wondering if someone who is better than me at reading this could help me understand what these errors means and how urgent it is to address it.Thank you in advance for any help with this.
My system specs just in case:
OS Version:
FreeNAS-11.3-MASTER-201903060936
(Build Date: Mar 6, 2019 5:51)
Processor:
Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz (8 cores)
Memory:
16 GiB
Code:
replicator# smartctl -x /dev/da1 smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD40EZRX-00SPEB0 Serial Number: WD-WCC4E996889J LU WWN Device Id: 5 0014ee 2b54cdc9b Firmware Version: 80.00A80 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 6 11:23:50 2019 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (53460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 534) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 177 177 021 - 8108 4 Start_Stop_Count -O--CK 100 100 000 - 35 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 048 048 000 - 38489 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 35 192 Power-Off_Retract_Count -O--CK 200 200 000 - 34 193 Load_Cycle_Count -O--CK 200 200 000 - 191 194 Temperature_Celsius -O---K 121 115 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 1 198 Offline_Uncorrectable ----CK 200 200 000 - 1 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 20701 - # 2 Extended offline Completed without error 00% 20197 - # 3 Extended offline Completed without error 00% 18014 - # 4 Extended offline Completed without error 00% 17511 - # 5 Extended offline Completed without error 00% 17007 - # 6 Extended offline Completed without error 00% 14826 - # 7 Extended offline Completed without error 00% 13153 - # 8 Extended offline Completed without error 00% 12649 - # 9 Extended offline Completed without error 00% 10468 - #10 Extended offline Completed without error 00% 9963 - #11 Extended offline Completed without error 00% 7278 - #12 Extended offline Completed without error 00% 6775 - #13 Extended offline Completed without error 00% 4594 - #14 Extended offline Completed without error 00% 3922 - #15 Extended offline Completed without error 00% 3419 - #16 Extended offline Completed without error 00% 2916 - #17 Short offline Completed without error 00% 1262 - #18 Short offline Completed without error 00% 1238 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 26/34 Celsius Lifetime Min/Max Temperature: 19/37 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (89) Index Estimated Time Temperature Celsius 90 2019-03-06 03:26 30 *********** ... ..( 55 skipped). .. *********** 146 2019-03-06 04:22 30 *********** 147 2019-03-06 04:23 31 ************ ... ..( 11 skipped). .. ************ 159 2019-03-06 04:35 31 ************ 160 2019-03-06 04:36 32 ************* ... ..( 23 skipped). .. ************* 184 2019-03-06 05:00 32 ************* 185 2019-03-06 05:01 31 ************ ... ..( 2 skipped). .. ************ 188 2019-03-06 05:04 31 ************ 189 2019-03-06 05:05 32 ************* ... ..( 2 skipped). .. ************* 192 2019-03-06 05:08 32 ************* 193 2019-03-06 05:09 31 ************ ... ..( 61 skipped). .. ************ 255 2019-03-06 06:11 31 ************ 256 2019-03-06 06:12 32 ************* ... ..( 2 skipped). .. ************* 259 2019-03-06 06:15 32 ************* 260 2019-03-06 06:16 31 ************ ... ..(194 skipped). .. ************ 455 2019-03-06 09:31 31 ************ 456 2019-03-06 09:32 30 *********** ... ..(110 skipped). .. *********** 89 2019-03-06 11:23 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 77 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 78 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 42202926 Vendor specific
s
Wed, 06 Mar 2019 18:44:04 GMT