So I did an upgrade this morning and it appears that it updated without issue. After the upgrade: I get zfs - status is unknown. I tried to detach and auto-import, but nothing shows up on the drop down list. if it helps - freenas is on a VM environment with direct lun access.
Based on other posts, here is the diagnostics I can report on:
zpool import returns back with nothing
zpool status return back with "no pools available"
smartctl -a /dev/da1-4 all come back clean
zdb comes back with my pool listed and nothing I could see startling there.
camcontrol devlist lists the four drives (and two vmware devices)
so the drives look mounted and all but no pools show up under /mnt (which i assume makes sense with the "no pools available"). Not sure what to look for in the startup log... but nothing was obviously related (though i definitely don't know my way around linux)
Not sure where to go from here.. except maybe do a brand new install of 8.3 and hope the auto-import works (aka some device showing up there).
Based on other posts, here is the diagnostics I can report on:
zpool import returns back with nothing
zpool status return back with "no pools available"
smartctl -a /dev/da1-4 all come back clean
zdb comes back with my pool listed and nothing I could see startling there.
camcontrol devlist lists the four drives (and two vmware devices)
so the drives look mounted and all but no pools show up under /mnt (which i assume makes sense with the "no pools available"). Not sure what to look for in the startup log... but nothing was obviously related (though i definitely don't know my way around linux)
Not sure where to go from here.. except maybe do a brand new install of 8.3 and hope the auto-import works (aka some device showing up there).