Hey there,
right away: I know there are already plenty of Posts reguarding this topic. I my self did allready flash a similar contoller for my last TrueNas build but now I am totaly stuck.
Short: I do get the classic "No LSI SAS adapters found!" if I try to use any sas2flsh commands in the uefi shell. Did try P05,07,15,19). If I boot DOS in legathy mode the card is recodnised and I can use the Megrec comands. Erasing works that way - falshing not. I´m quit shure but not fully confindent to have the sytax right. I did try s.th, like Megarec -m0flash 0 2118it.bin and Megarec -cleanflash 0 2118it.bin. It erases succsesflully but fails on flashing. Cant use the sas2flsh commands on DOS as I do get the "ERROR: Failed to initialize PAL. Exiting program." error.
Even after performing the megarec clenaing prozesses successfully I still get "No LSI SAS adapters found!" in the Uefi shell with sas2flsh.
Tried it all with the Asrock Rack and a MSI X570 Tomahawk. If I use the build in Shell on the Asrock I get "InitShellApp: Application not started from Shell" isted of "No LSI SAS adapters found!" if I boot an uefi shell from a stick.
Any help is appriciated. Thx in advance.
right away: I know there are already plenty of Posts reguarding this topic. I my self did allready flash a similar contoller for my last TrueNas build but now I am totaly stuck.
Short: I do get the classic "No LSI SAS adapters found!" if I try to use any sas2flsh commands in the uefi shell. Did try P05,07,15,19). If I boot DOS in legathy mode the card is recodnised and I can use the Megrec comands. Erasing works that way - falshing not. I´m quit shure but not fully confindent to have the sytax right. I did try s.th, like Megarec -m0flash 0 2118it.bin and Megarec -cleanflash 0 2118it.bin. It erases succsesflully but fails on flashing. Cant use the sas2flsh commands on DOS as I do get the "ERROR: Failed to initialize PAL. Exiting program." error.
Even after performing the megarec clenaing prozesses successfully I still get "No LSI SAS adapters found!" in the Uefi shell with sas2flsh.
Tried it all with the Asrock Rack and a MSI X570 Tomahawk. If I use the build in Shell on the Asrock I get "InitShellApp: Application not started from Shell" isted of "No LSI SAS adapters found!" if I boot an uefi shell from a stick.
Any help is appriciated. Thx in advance.