Hey Guys,
i build a new Server for myself. With VMWare ESXi 6.5 as Hypervisor where i can have FreeNas running.
The Components are:
- Supermicro X11SSH-LN4F
- 32GB ECC RAM
- Xeon E3-1230 v6
- Dell H310 (flashed to IT Mode P20.00.07.00)
- 6x 4TB HDD
My Problem now is that VMWare can see the HBA with all my drives, and as soon as i enable passthrought the controller gets passed to the Virtual Machine. Everything looks fine.
As soon as i look on my FreeNas there are no drives at all, the Status on the top right is OK (Green).
When i take a look in the Console window i can see multiple Errors, i alredy googled about them but i was not able to find any solution.
Maybe someone can give me an advice what i should look for.
Thank you a lot.
i build a new Server for myself. With VMWare ESXi 6.5 as Hypervisor where i can have FreeNas running.
The Components are:
- Supermicro X11SSH-LN4F
- 32GB ECC RAM
- Xeon E3-1230 v6
- Dell H310 (flashed to IT Mode P20.00.07.00)
- 6x 4TB HDD
My Problem now is that VMWare can see the HBA with all my drives, and as soon as i enable passthrought the controller gets passed to the Virtual Machine. Everything looks fine.
As soon as i look on my FreeNas there are no drives at all, the Status on the top right is OK (Green).
When i take a look in the Console window i can see multiple Errors, i alredy googled about them but i was not able to find any solution.
Code:
dmesg | grep mps mps0: <Avago Technologies (LSI) SAS2008> port 0x4000-0x40ff mem 0xfd4f0000-0xfd4fffff,0xfd480000-0xfd4bffff irq 18 at device 0.0 on pci3 mps0: IOC in unknown state 0xf0000000 mps0: Cannot transition IOC to ready mps0: mps_attach failed to transition ready device_attach: mps0 attach returned 22 mps0: <Avago Technologies (LSI) SAS2008> port 0x4000-0x40ff mem 0xfd4f0000-0xfd4fffff,0xfd480000-0xfd4bffff irq 18 at device 0.0 on pci3 mps0: IOC in unknown state 0xf0000000 mps0: Cannot transition IOC to ready mps0: mps_attach failed to transition ready device_attach: mps0 attach returned 22 pmc: Unknown Intel CPU. hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> VMware memory control driver initialized vmx0: link state changed to UP uhid0: <VMware> on usbus0 uhid1: <VMware> on usbus0 [root@freenas ~]# sas2 sas2flash sas2ircu [root@freenas ~]# sas2 sas2flash sas2ircu [root@freenas ~]# sas2flash -c 0 -list LSI Corporation SAS2 Flash Utility Version 16.00.00.00 (2013.03.01) Copyright (c) 2008-2013 LSI Corporation. All rights reserved No LSI SAS adapters found! Limited Command Set Available! ERROR: Command Not allowed without an adapter! ERROR: Couldn't Create Command -c Exiting Program. [root@freenas ~]# sas2flash -listall LSI Corporation SAS2 Flash Utility Version 16.00.00.00 (2013.03.01) Copyright (c) 2008-2013 LSI Corporation. All rights reserved No LSI SAS adapters found! Limited Command Set Available! ERROR: Command Not allowed without an adapter! ERROR: Couldn't Create Command -listall Exiting Program.
Maybe someone can give me an advice what i should look for.
Thank you a lot.