Install stops

Joined
Sep 5, 2020
Messages
3
the computer is a i5, 8gb ram a 32gb sandisk and 250gb hard drives

I setup the usb drive to install, it gets to the intial phase I press one all starts up but then it stops I have taken a picture of the screen any ideas wuld be very helpful

IMG_20200905_135031.jpg
 
Joined
Sep 5, 2020
Messages
3
I had hoped for some answers, I hope I posted this in the right forum but Seems that without help I will have to give up on this:frown:
 

SweetAndLow

Sweet'NASty
Joined
Nov 6, 2013
Messages
6,421
Probably a bad boot device or install device.
 
Joined
Sep 5, 2020
Messages
3
Probably a bad boot device or install device.
it is a problem installing I used a DT101 G2 usb 32gb for the download from Freenas11.3-U4 , I used rufus 3.11 to create a ISO bootable on the USB stick and then weht through as per instructions
 
Top