Installation stops at 99.8%

[Motormike]

Servus,

Hardware

Ga-H77-DS3H Mainboard
8 GB RAM
G540 Celeron

ISo to CD burned V 9.1.1

Cd boots and show the list what i can do
I choose Installation and my USB Stick (8GB, tried different ones)
Installation starts and stops at 99,8%. After a while the pc switches off.
Tried it with 32 and 64 bit version , also downloaded Freenas again and retried this, but always stops at 99,8%

Help ;)

gruss

Mike

 

[PinkyThePig]

Is the USB plugged in to a USB 2 or USB 3 port? Even though USB 3 is supposed to be backwards compatible it can still cause some issues sometimes. Try doing USB 2. You can also follow these instructions to write the img to a USB drive directly from inside another OS: http://doc.freenas.org/index.php/Burning_an_IMG_File

Basically you just extract the img from the .iso and using an imaging program to write the image to the USB drive. It's how I did my install.

 

[Motormike]

I tried USB 2 and USB 3 ports. Both failed.
Will now try to write image directly.

 

[gpsguy]

Another thing you could do - use another computer to install FreeNAS on the USB stick. Then insert it in your server and use it there.


Sent from my phone

 

[cyberjock]

If I remember correctly, it will sit at 99.8% for a few minutes, but it will finish.

 

[Motormike]

got it to work but when i choose

1. Assign network interface

Then i got this messag ein a loop

noperiph:ata2:0:-1:-1): rescan already queued

Its a
http://www.gigabyte.de/products/product-page.aspx?pid=4146#sp

 

[dlavigne]

Post the output of "ifconfig".

 

[Motormike]

Motherboard was damaged, changed to an
ASROCK B75-M3 and it seems to work
Thanks for help