benard mensah
Cadet
- Joined
- Mar 15, 2016
- Messages
- 2
i am looking to use the hp proliant dl380 g5 with 16gb and two intel xeon cpus, for the drive am looking to use 8 x WD Red 750GB 2.5" SATA NAS Hard Drive with hp's 10GBe pci-e2 for use in a hyper-v clustered environment.
my questions are;
is this setup compatible
how do i setup the network with the 10GBe pci-e2 for iscsi
will all the drive be read by the smart controller?
my questions are;
is this setup compatible
how do i setup the network with the 10GBe pci-e2 for iscsi
will all the drive be read by the smart controller?
Last edited: