StandardAtomic
Cadet
- Joined
- Nov 20, 2011
- Messages
- 8
Hello Everyone,
I'm Lyle a tech support engineer for a company that makes FC cards, FCoE cards, iSCSI cards and 10 gig ethernet cards. That all and some FC switches. A little sleuthing and you'll be able to figure out which company that is.
So I'm really tired of dealing with all this high end stuff at work and having a poor performing NAS drive here at home so I'm deploying freenas on a dual core HP box with 4 gigs of ram.
At the moment I have the freenas OS on a 4 gig thumbdrive. But I'll be using a 2 gig micro SD card placed in the system's front panel media panel, provided the uSD card is faster than the thumb drive.
I've got the following off of the SATA ports of this box:
pair of 15k RPM raptors :)
1TB drive
2 TB drive
Then off of USB I have a 1TB drive and will be adding a 2TB USB drive once I've migrated some data around. The plan is to have the raptors striped. Those will be for smaller files. I'll replicate the raptor filesystem to the mirrored 2TB (gzip -9 zfs property) for redundancy. Then the two 1 TB drives will be striped and also replicated to the 2TB mirrored drives.
The host has the onboard ethernet (nfe driver), a broadcom PCI-X NIC (bge driver) and some other PCI-E x1 GigE nic (msk driver).
I'm just about to start benchmarking the subsystems of the host before placing data on it.
Where in the forums should I place my benchmarking suggestions and results?
Lyle
I'm Lyle a tech support engineer for a company that makes FC cards, FCoE cards, iSCSI cards and 10 gig ethernet cards. That all and some FC switches. A little sleuthing and you'll be able to figure out which company that is.
So I'm really tired of dealing with all this high end stuff at work and having a poor performing NAS drive here at home so I'm deploying freenas on a dual core HP box with 4 gigs of ram.
At the moment I have the freenas OS on a 4 gig thumbdrive. But I'll be using a 2 gig micro SD card placed in the system's front panel media panel, provided the uSD card is faster than the thumb drive.
I've got the following off of the SATA ports of this box:
pair of 15k RPM raptors :)
1TB drive
2 TB drive
Then off of USB I have a 1TB drive and will be adding a 2TB USB drive once I've migrated some data around. The plan is to have the raptors striped. Those will be for smaller files. I'll replicate the raptor filesystem to the mirrored 2TB (gzip -9 zfs property) for redundancy. Then the two 1 TB drives will be striped and also replicated to the 2TB mirrored drives.
The host has the onboard ethernet (nfe driver), a broadcom PCI-X NIC (bge driver) and some other PCI-E x1 GigE nic (msk driver).
I'm just about to start benchmarking the subsystems of the host before placing data on it.
Where in the forums should I place my benchmarking suggestions and results?
Lyle