How to resolve network interface problem?

[Fei]

Hello everyone ,
I'm FreeNAS rookie I installed FreeNas 9.2.0 release on my lab
i set network interface

Why only ping 192.168.1.125 No respond?

((I'm come from TW, So English very poor........sorry))

 

[phoenix]

The likely answers to that is the PC (IP address) does not exist on your LAN, if it does exist then it's powered off.

 

[Fei]

Hi phoenix
i use my PC(192.168.1.12) ping FreeNAS(192.168.1.125) no respond
but ping (123 or 124 or 126) its OK!

 

[phoenix]

Are you really sure that's the IP address of your FreeNAS server, do you have any firewall that's likely to be blocking any connection to that IP address/

 

[joelmusicman]

So it appears that your server has 4 NICs, and you have plugged all ports into a switch?

Could you try again with just one port plugged in?

 

[Fei]

Are you really sure that's the IP address of your FreeNAS server, do you have any firewall that's likely to be blocking any connection to that IP address/

Sure ,the IP address is my FreeNAS server use.
i check my firewall all disable!

 

[Fei]

So it appears that your server has 4 NICs, and you have plugged all ports into a switch?

yes , i have 2 port NIC card *2 and I have plugged all port into a swithch.

 

[Fei]

Could you try again with just one port plugged in?

Thanks joelmusicman,
I resolve my problem,I find this NIC prot always Loose.....So my network can't use:(



thanks all..