Good Evening,
I am still learning so warning may ask silly questions.
Currently my transfer speed is hovering around 8MB/s ( transferring a mix of small and large files) this is the same with transferring from the pc to the primary or primary to the secondary . I have been looking for the forum for days now trying to find the answer but still cannot working out.
My long term goal is to have the primary as my main datastore and secondary as a complete duplicate, with the plan to move it off-site (Tailscale used to talk back to Primary (only thing on the VM drive currently))
Network Topology:
Primary -> unmanaged gig switch -> Secondary
^ ^
AP< - Router PC
Hardware:
-Primary (Alpha) .134
HP micro server Gen8 (Intel(R) Xeon(R) CPU E31260L, 16gm ram) running TrueNAS-SCALE-22.12.4
4x Patriot_P210_2048GB in RAIDZ1 --> One SMB dataset
1x SAMSUNG MZVLW256HEHP (Just for VM's)
-Secondary (Beta) .188
HP micro server Gen8 (Intel(R) Xeon(R) CPU E31260L, 16gm ram) running TrueNAS-SCALE-22.12.4
4x WDC_WD20EFRX-68EUZN0 in RAIDZ1 --> One SMB dataset
1x SAMSUNG MZVLB256HAHQ (Just for VM's)
Network test (iperf3) between Primary and Secondary
SMB setup (Primary & Secondary):
Things I have tried so far:
Changed MTU size to 9000 --- No change
Changed network cables --- No change
Changed switch --- No change
Blinding IP in SMB settings --- No change
Adding the Below in SMB settings:
server multi channel support = yes --- No change
interfaces = "192.168.82.100;capability=RSS,speed=10000000000"--- unable to save get error (interfaces is a blacklisted auxiliary parameter. Changes to this parameter are not permitted.)
Not sure is this is something
Device interrupts ???
have a similar number on the Secondary as well.
Please help, I am lost on what the issue is.
Thanks in advance
I am still learning so warning may ask silly questions.
Currently my transfer speed is hovering around 8MB/s ( transferring a mix of small and large files) this is the same with transferring from the pc to the primary or primary to the secondary . I have been looking for the forum for days now trying to find the answer but still cannot working out.
My long term goal is to have the primary as my main datastore and secondary as a complete duplicate, with the plan to move it off-site (Tailscale used to talk back to Primary (only thing on the VM drive currently))
Network Topology:
Primary -> unmanaged gig switch -> Secondary
^ ^
AP< - Router PC
Hardware:
-Primary (Alpha) .134
HP micro server Gen8 (Intel(R) Xeon(R) CPU E31260L, 16gm ram) running TrueNAS-SCALE-22.12.4
4x Patriot_P210_2048GB in RAIDZ1 --> One SMB dataset
1x SAMSUNG MZVLW256HEHP (Just for VM's)
-Secondary (Beta) .188
HP micro server Gen8 (Intel(R) Xeon(R) CPU E31260L, 16gm ram) running TrueNAS-SCALE-22.12.4
4x WDC_WD20EFRX-68EUZN0 in RAIDZ1 --> One SMB dataset
1x SAMSUNG MZVLB256HAHQ (Just for VM's)
Network test (iperf3) between Primary and Secondary
SMB setup (Primary & Secondary):
Things I have tried so far:
Changed MTU size to 9000 --- No change
Changed network cables --- No change
Changed switch --- No change
Blinding IP in SMB settings --- No change
Adding the Below in SMB settings:
server multi channel support = yes --- No change
interfaces = "192.168.82.100;capability=RSS,speed=10000000000"--- unable to save get error (interfaces is a blacklisted auxiliary parameter. Changes to this parameter are not permitted.)
Not sure is this is something
Device interrupts ???
have a similar number on the Secondary as well.
Please help, I am lost on what the issue is.
Thanks in advance
