Dariusz1989
Contributor
- Joined
- Aug 22, 2017
- Messages
- 185
Hey
I was battling with freenas transfer speeds and today I decided to do a "Raw" test.
So I unplug all my hdds + my OS USB.
I plug in m.2 512gb hdd 2GB/s read/1GB/s write more or less.
I use 10gb intel 520x-da2 nics on both my pc and nas.
I installed U2 as that version used to work for me.
So I went ahead and started a transfer test. Before on old setup, I was getting 300mb read/write. Now I'm getting 150Mb/s writes and 300Mb/s read. I'm out of ideas. What to do to get my freenas to utilize full power it has?
When I 1st started with freenas 1-2 months ago On my 1st install using 4 HDDs - standard spining ones wd red pro, I was getting 800Mb/s read and 500Mb/s write. Now on m.2 test I'm getting fraction of what I used to get :/
I don't know what to do/how to troubleshoot it anymore:- (
The 1st test I did before was direct connection PC>NAS. Then I added switch and transfer speed dropped. Now when I did PC>NAS connection again I still have slow speeds... its as if something got damaged...
Supermicro X11SSM-F-O
16gb ECC ram
Xeon E3 1260L - I think
M.2 sm951 512gb
Intel X520-da2
Just to recap
I installed freenas 2 months ago on 4hhds PC>NAS 10gbe connection = 800Mb/s read/500Mb/s write
I updated to be PC>Switch>NAS > 300Mb/s cap
I went back to PC>NAS 300Mb/s cap speed remain
I formated/reinstalled with m.2 > 150Mb/s write/ 300Mb/s read.
Regards
Dariusz
I was battling with freenas transfer speeds and today I decided to do a "Raw" test.
So I unplug all my hdds + my OS USB.
I plug in m.2 512gb hdd 2GB/s read/1GB/s write more or less.
I use 10gb intel 520x-da2 nics on both my pc and nas.
I installed U2 as that version used to work for me.
So I went ahead and started a transfer test. Before on old setup, I was getting 300mb read/write. Now I'm getting 150Mb/s writes and 300Mb/s read. I'm out of ideas. What to do to get my freenas to utilize full power it has?
When I 1st started with freenas 1-2 months ago On my 1st install using 4 HDDs - standard spining ones wd red pro, I was getting 800Mb/s read and 500Mb/s write. Now on m.2 test I'm getting fraction of what I used to get :/
I don't know what to do/how to troubleshoot it anymore:- (
The 1st test I did before was direct connection PC>NAS. Then I added switch and transfer speed dropped. Now when I did PC>NAS connection again I still have slow speeds... its as if something got damaged...
Supermicro X11SSM-F-O
16gb ECC ram
Xeon E3 1260L - I think
M.2 sm951 512gb
Intel X520-da2
Just to recap
I installed freenas 2 months ago on 4hhds PC>NAS 10gbe connection = 800Mb/s read/500Mb/s write
I updated to be PC>Switch>NAS > 300Mb/s cap
I went back to PC>NAS 300Mb/s cap speed remain
I formated/reinstalled with m.2 > 150Mb/s write/ 300Mb/s read.
Regards
Dariusz
Last edited: