Erwin1e
Cadet
- Joined
- Dec 6, 2015
- Messages
- 7
Hello,
I have a small issue when i enable the onboard network adapter on the mainboard Freenas refuses to boot unless i completely disconnect the powersupply. This hasnt been a problem becasue i disabled the onboard lan and inserted an extra network adapter.
But looking at my use. I only activly use the machine maybe 4 hours a day at best. The rest im working or just to busy doing other things. So i decided to see if i can get WOL working. This way i can use domoticz to wakeup the server when i need it or turn it of when i dont need it.
The behaviour i'm expiriencing is as following. When using wol or not fully powering down the machine Freenas refuses to boot. It all is fine untill after the bootmenu it gives me Fatal Trap 12. I checked the forums and i notices other people also got Fatal trap 12 but each time the cause is differently. If i disable the onboard network adapter all my issues are resolved.
Does anyone know how i can troubleshoot this issue or better resolve it. Any help is much appreaciated.
To make my story verry short.
Screenshot HELP :(
Asrock H61DE/S3 (Replacing this will most likely sovle my issue)
Intel Core I3 2100T
16 GB RAM (unknown brand)
Disk different brands and different sizes. Mostly 2T disks
Kind Regards,
Erwin
I have a small issue when i enable the onboard network adapter on the mainboard Freenas refuses to boot unless i completely disconnect the powersupply. This hasnt been a problem becasue i disabled the onboard lan and inserted an extra network adapter.
But looking at my use. I only activly use the machine maybe 4 hours a day at best. The rest im working or just to busy doing other things. So i decided to see if i can get WOL working. This way i can use domoticz to wakeup the server when i need it or turn it of when i dont need it.
The behaviour i'm expiriencing is as following. When using wol or not fully powering down the machine Freenas refuses to boot. It all is fine untill after the bootmenu it gives me Fatal Trap 12. I checked the forums and i notices other people also got Fatal trap 12 but each time the cause is differently. If i disable the onboard network adapter all my issues are resolved.
Does anyone know how i can troubleshoot this issue or better resolve it. Any help is much appreaciated.
To make my story verry short.
Screenshot HELP :(
Asrock H61DE/S3 (Replacing this will most likely sovle my issue)
Intel Core I3 2100T
16 GB RAM (unknown brand)
Disk different brands and different sizes. Mostly 2T disks
Kind Regards,
Erwin