FreeNASBob
Patron
- Joined
- Aug 23, 2014
- Messages
- 226
I have an Asrock C2550D4i with 16GB RAM running FreeNAS from a USB stick. No zpools attached yet. As I was working in the FreeNAS console looking around the file system with a lot of ls -a commands the IPMI went haywire and lost the connection and wouldn't reconnect. I power cycled the server. Now when the machine is powered off everything on my LAN works fine. I can ping my router for hours on end with 1ms response times. Shortly after the FreeNAS machine is powered up the router is dropping packets like crazy and nobody's iPhones or Androids can access the Internet. The pings from the desktop to the FreeNAS box go through the roof with about 60% packet loss. It's so laggy that I can't access IMPI again because it gives me errors about unexpected connection closing or something.
I unplugged the LAN cable and only left the IPMI cable plugged in and I still see the same issue. If I unplug the IPMI cable the issue goes away. It seems like there's some major issue with the IPMI. I'm not sure how to go about fixing it or resetting IPMI, or how it could trash the whole network.
Any ideas are appreciated.
I unplugged the LAN cable and only left the IPMI cable plugged in and I still see the same issue. If I unplug the IPMI cable the issue goes away. It seems like there's some major issue with the IPMI. I'm not sure how to go about fixing it or resetting IPMI, or how it could trash the whole network.
Any ideas are appreciated.